PHiliphh MRX M3535A Defibrillator Printer Connector Board M3535-60120

►Quick Detail:

The accessory part of PHiliphh MRX M3535A Defibrillator Printer Connector Board M3535-60120 ,It is a green circuit board composed of precision electronic circuit boards and electronic components. Although it is second-hand, its condition is very good, and you need to disassemble the printer casing to access the internal components of the printer. This usually involves dismantling the top and side covers of the printer. Use appropriate tools, such as a small Phillips screwdriver, to remove the Phillips screws located on both sides of the cardboard feed on the back of the printer. Gently lift the upper part of the printer along the left and right gaps, while being careful not to apply too much force to avoid damaging the data transmission line of the scanner

►FAQ:

1. How to remove dust on the circuit board?

You can use a spray to blow the dust off the circuit board, but be careful not to spray it onto the components or slots on the circuit board. It is recommended to use a jet canister, as the air contained in the canister is anhydrous and can more thoroughly remove dust.

2. What should I do if I can't remember the position of the cable after unplugging it?

It is recommended to number the cables one by one when dismantling them, and then record the corresponding numbers and positions on paper. This way, you don't have to worry about not being able to remember the exact location of each cable after disassembly.

3. What should I do if I cannot install the circuit board back after disassembling it?

After disassembling the circuit board, it is best to make a mark on paper, recording every step and detail for future reinstallation. If there is no record, you can refer to relevant manuals or online video tutorials, or ask professional technicians to help with installation.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex,etc.We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.