Opel Erba Biochemical Analyzer Light Source Bulb

12V 20W XL-200/300/400/600/640 new

►Quick Detail:

The Opel Erba Biochemical Analyzer Light Source Bulb 12V 20W XL-200/300/400/600/640 new is a specialized halogen bulb used in clinical laboratory analyzers, particularly the Erba, Transasia XL series biochemical machines.

Specifications:
Voltage: 12V
Power: 20W
Base type: usually double needle (G4 or G6.35) - please confirm with your analyzer model.
Filament type: Halogen (precise beam used for photometric measurement).
Service life: approximately 1000-2000 hours (depending on the usage cycle).
Compatibility: Suitable for Erba XL-200, XL-300, XL-400, XL-600, XL-640 analyzers.

If the biochemical analyzer needs to replace the light bulb, the following conditions generally need to be met: for example, if the light bulb has been running for more than 750 hours, or if there is an error in the inspection results, or if the biochemical analyzer machine equipment has an alarm, the light bulb needs to be replaced in a timely manner. Ensure that the absorbance reading of the light bulb is correct. So when replacing the light bulb, it is necessary to open the blue protective cover of the biochemical analyzer, the right door, and the light bulb cover. At the same time, unplug the black plug power cord of the bulb and loosen the two metal screws on the bulb to remove it. Unscrew the two metal screws on the light bulb again, do not throw them away, they need to be re screwed onto a new light bulb. First, tighten the two metal screws of the new light bulb. Do not touch the glass part of the new light bulb. Plug in the black power cord, close the bulb cover, close the right door, align the notch on the bulb with the protruding position on the base, insert the bulb and tighten the two screws. Operate on the biochemical analyzer and the light bulb will light up immediately. Please wait for 30 minutes for the light bulb to stabilize.
It is crucial to turn off the power of the analyzer before replacing the light bulb.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex, We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.