TOPCON ACP-7 12V 30W Eye Chart Projector Lamp TN426676 new

►Quick Detail:

TOPCON ACP-7 12V 30W Eye Chart Projector Lamp TN426676 new

This light bulb source is mainly matched with vision projectors. It is a high-precision visual inspection device. If the installation and use of the light bulb are not correct, its accuracy will be greatly reduced. Therefore, it is necessary to strictly regulate the installation position, angle, and height of the projector. The projector should be installed at the same distance from the projection board to the customer and maintained at almost the same height as the customer's eyes. To avoid distortion, the tilt of the projector should be within 8 ° and not exceed 10 ° at most. In addition, the projection board should be kept flat, not bent or deformed, and the installation height should be consistent with the customer's eye height.
When using a projector, it is necessary to use a projection board and recognize the frosted surface of the projection surface to avoid reverse installation.
In order to improve the accuracy and consistency of optometry, we need to build a scientific and standardized optometry room. By avoiding the use of mirrors to increase distance, standardizing vision lightboxes, maximizing the use of high-precision and reasonable layout optometry rooms, controlling indoor lighting, and correctly installing and using vision projectors, we can create a professional optometry room and provide customers with better optometry services.

► Usage Environment​ :

The light in the optometry room should be uniform and stable, avoiding the influence of other cluttered light. It is recommended to use controllable light sources, such as high-frequency energy-saving lamps, and use frosted sleeves to produce diffuse light sources. When testing remote prescriptions, the illumination should be maintained at 300lx; When testing the prescription for immediate use, the illuminance should be increased to 500lx; When conducting an X-ray or fundus examination, it is necessary to reduce the illumination to below 150lx. To meet these illumination requirements, lights can be turned on or off as needed, or devices can be controlled using rotary light sources. In addition, it is recommended to hang professional knowledge in optometry and eyeglass fitting, such as the optometrist qualification certificate, optometry process, contact lens process, and refractive error diagram, on the wall to increase professionalism and trust.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex, We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.