Philiph TC10 ECG machine mainboard

453564384291 453564384301

► About Philiph TC10 ECG machine mainboard 453564384291 453564384301

The Philiph TC10 ECG machine motherboard 453564384291 453564384301 contains the loading software and Windows CE kernel image in the

internal flash memory (64 MB). At system startup, the loader performs basic interface configuration and loads the Windows CE kernel. Once

Windows CE is loaded, the application launcher runs and validates the system and executable images before loading the main application. All

user interaction is through the Athena_APP application. This application software is stored in the internal flash memory.

The main control board (including interface boards and cables) allows access to interfaces such as compact flash wireless LAN, USB connector,

PS/2 connection for barcode reader device, phone connector for modem, and RJ45 connector for LAN.

► Specification of Philiph TC10 ECG machine mainboard 453564384291 453564384301

► Philiph TC10 ECG machine mainboard 453564384291 453564384301 Maintenance

Maintaining the Philiph TC10 ECG machine's main board (also known as the motherboard) is important to ensure optimal performance and longevity of your device. The motherboard is the main component that controls all of the electronic functions of the ECG machine.

Motherboard maintenance tips:

1.Periodic inspection:

Periodically inspect the motherboard for signs of wear, corrosion, or damage, such as burned components, loose connections, or bulging capacitors.

Make sure all connectors and cables are securely connected.

2.Cleaning:

Use compressed air to blow dust and debris off the motherboard and surrounding area.

Do not use liquid cleaners directly on the motherboard. If necessary, clean the contacts and connectors with a soft, lint-free cloth lightly moistened with isopropyl alcohol (90% or higher).

Common motherboard problems and troubleshooting:

1.Device will not turn on:

Check the power and battery connections to the main board.

Check the main board for obvious damage or loose parts.

2.Errors or noise in the ECG signal:

Make sure all cables and electrodes are connected correctly.

Check the motherboard for faulty components or bad solder joints.

3.Problems with the touch screen or display:

Check the connection between the motherboard and the display module.

Check for damaged connectors or cables.

4.Unexpected shutdown:

Check the motherboard for overheated components or improper thermal management.

Make sure the device is operating within the recommended temperature range.

Thank you so much for your attention .If you're interested in Philiph TC10 ECG Machine Main Board Motherboard 453564384291 453564384301,feel free to contact us .Thank you .