One Key Touch Dimming Bathroom Light PCBA Circuit Board LED Soft Light

Specification

Operation instruction

When the initial power is on, the lamp is in the off state; The backlight is always on when it is electrified.

Click-touch and long-touch can be used at any time without interference or restriction.

Click touch (touch duration less than 550ms), the light can be turned on and off control. One touch, the light comes on; Click and touch again, and the lights go out. And so on. Brightness buffer when light is on or off. The initial brightness of the light is fixed at 50% of the full brightness. When you press the touch for a long time (the touch duration is more than 550ms), the stepless brightness of the light can be adjusted.

Characteristic

1. This product is touch-controlled induction switch, sensitive response, quiet and quick;

2. Touch function can be realized under the isolation protection of media (such as glass, acrylic, plastic, ceramic, etc.) with high safety performance

Package

1. Anti-static bubble film shall be used for packaging and packing after piecing together

2. Matters needing attention when packing

1) Considering the force comprehensively, the direction set up after PCBA packing should be the same as that of corrugated carton

2) Avoid the collision between PCBas during packaging; Appropriate placement and bubble film thickness should be selected

Customer is always NO.1

We care about our valued customers and understand the concerns and frustrations you might have, and will try our best to resolve the issues.. We strive to answer all emails as quickly as possible, but due to high email volume it may take time for us to reply. Thanks in advance for your patience!
Contact us first before leaving a negative, we will find a solution to meet your requirement and enhance the satisfaction.