USB Micro Button Switch Small Disinfection Lamp PCBA Circuit Board For Chairs
Specification
PCBA size | 28*50*1mm |
Working indicator color | Blue |
Battery Capacity | 1200mah |
Position of charging lamp and filling lamp. | (around 10mm around the button center). Confirm with the customer |
Instruction | Red 0603 is in charge, green 0603 is fully charged and blue 0603 is in operation |
circuit |
battery anti-back connection |
Button size | 5.2*5.2*5mm |
Working requirements | USB or battery |
The battery connector is as follows. The rest of the positive and negative to confirm with the customer.
A. Directly charge the 3.7V 18650 lithium battery when USB is connected. The charging indicator is red and turns green after full.
B. Press the switch and start the rear light and fan at the same time, until the switch is pressed again and turned off at the same time. No need to turn off the lights regularly. The indicator light is blue at work.
C. The lamp and fan can work with either USB or battery power alone
Functional requirements
A. Directly charge the 3.7V 18650 lithium battery when USB is connected. The charging indicator is red and turns green after full. Neither the light nor the fan is working.
B. Press the switch and start the rear light and fan at the same time, until the switch is pressed again and turned off at the same time. No need to turn off the lights regularly. The indicator light is blue at work.
C. The lamp and fan can work with either USB or battery power alone
Advantage
Application
Application scenarios include: disinfection in cars, children's tableware, bed sheets, bedding, office supplies, sofa, tables, chairs, shoe cabinets, etc.