One Side DC 4.5V Human Induction Lamp PCBA Circuit Board With Sensitive Head
Specification
maximum current | 111mA |
Setting | Sensitive head |
LEDs | LED soft light treatment |
Drive type | Drive MOS type |
Table lamp input power | 7th dry batteries |
Battery number | 3 batteries |
Interface input | Human activity sensing receiving head |
Operation instruction
Note: When the battery is purchased or reinstalled, and the battery is initially powered on, it will only enter the working state after about 1 minute of power-on initialization time.
1)When the light is working, Guan Min cancels the light control function and uses it under any lighting conditions. As long as the human activity is continuously sensed within 30 seconds of the lighting, it will continue to work until the human activity is no longer sensed. The light turns off automatically after 30 seconds.
2)When the light is not working, it will not work even if there is human activity in the daytime or in an environment with sufficient brightness.
Service
1. PCB Development and Design:
2. PCB Manufacturing From 1 to 32 Layers:
3. Component Sourcing:
4. PCB Assembly:
5. Write Program for Customers:
6. PCB/ PCBA Test.Semi-Automatic
Package
1. Anti-static bubble film shall be used for packaging and packing after piecing together
2. Matters needing attention when packing
1) Considering the force comprehensively, the direction set up after PCBA packing should be the same as that of corrugated carton
2) Avoid the collision between PCBas during packaging; Appropriate placement and bubble film thickness should be selected
Quality Control
1st : 100% Raw material quality control
2nd : 100% inspection after assembling
3rd : 100% aging test
4th: 100% quality inspection on packing lines
5th : sample inspection
before delivery Our defective rateis nearly 0% before shipment and lower than 0.3%after shipments.