Brief Introduction
SC610 is chip semiconductor packaging in line cleaning machine. Use to clean flux and other contamination on Chip after soldering during chip packaging process. SC810 is design to in line clean lead frame, IGBT, IPM, IC modules chips.
Machine Features
1.Semicon chips in line clean in packaging process.
2.Spray clean to remove flux and other contamination.
3.Chemical clean+ DI water rinse+ Hot air dry process.
4.Wash liquid and rinse DI water add/discharge automatically.
5.Wash liquid spray pressure can adjust for different chips.
6.High flow amount and high pressure liquid for precise FC packaging chips.
7.DI water resistivity monitoring system.
8.Air blow+ Hot air dry system.
9.PLC control system, English interface and friendly operation system.
10.304 stainless steel frame structure.
11.SMEMA lines to connect up and down stream equipment.
12.Wash liquid concentration real time monitoring system.
Machine SPEC
Item |
SC610 SPEC |
Net conveyor width |
600mm |
Net conveyor speed |
100~150cm/min |
Net conveyor height |
900±50mm |
Net conveyor direction |
Left to Right |
Product width size |
600mm as max |
Product height |
100mm as max |
Wash liquid tank capacity |
100L |
DI water capacity |
30+60L |
Filter precision |
0.2um |
DI water consumption |
400~800L/H |
Air vent amount |
32m³/H |
System control |
PLC |
Power/Air supply |
380VAC,3P,50/60HZ,110KW/0.5Mpa,200L/Min |
Resistivity range |
0~18MΩ |
Machine size |
L3500*W1750*H1650mm |
Machine weight |
2000KG |