Aluminium PCB Depanelizer With Circular Blades For LED Panel Strip

Features of pcb cutting machine YES6

1. For cutting any length v cut pcb, aluminum pcb, fiber board, FR4, LED pcb, pcba.

2. Threee pair of blades can guarantee the aluminum plate without deformation and damage after cutting.

3.Due to three times cutting, cutting process is smooth and can locate v cut very well to avoid v-cut jumping out.

4.High quality blade and samll cutting force ensures long life of blade.

5.Blades are calibrated by Excitation double-frequency laser interference measurement instrument, which can ensure rear and front blades cut same places of the v cut. Perfect cutting effect.

Our YES-6 Pre Scored PCB Separator Application

LED Panel,Fiber Board,Aluminium Plate,Aluminium Substrate,Copper Substrate FR4,Glass Fiber Board

Aluminum PCB separator features:

1.Decrease the stress , invoide the welding pot break.

2.Adjust the up guide slip by manual, which can solve the V cut depth different problem.

3. There is the guide for V groove, which can ensure the cutting quality

4.High efficiency , V max=200mm/s. Speed is adjustable.

5.High precision, easy to maintenance, safe enough.

6.Machine is portable,high speed, easy to operate.

7.The up and down blade can be adjusted accurately,Up blade adjust : 0-15mm.

8.It can make to order, if the PCB is over height or the special PCB.

9. PCB components height limit : 20mm, under the PCB board’s components height limit 10mm. Inside of the PCB max. width is 240mm, another side don’t limit.

10.The length of PCB Board can be Unlimited

Multicut PCB v cut machine details

1.Coutrolled by microcomputer program, it can cut board accurately with no error.

2.This machine applies unique multi sections cutting, the cutting is to be finished

by 6 pieces round blade.

3.Precise adjustment of up and down blade.Adjustable blade moving speed : 200mm/s. As per customers' need, certain speed can be set

4.Operation platform can be adjustable higher and lower between 0 and 50mm

5. Working process is pretty smooth, due multi sections cutting.

6.There won`t be any deviation when cutting along the v-cut slot, even the v-cut

slot is shallow.

7.Pre-set the cutting start and end point to well control the cutting length