CNC V-CUT HT-1200 Cutting Machine with Microsoft WindowsXP System

Specifications

1, Machine name: CNC V-CUT HT-1200 CNC V-CUT cutting machine

2, Power: AC220V ± 5V, 1 ¢ 50HZ 5KVA (requirements must be equipped with a power regulator)

3, air source: 0.5Mpa 50NL / Min

4, vacuum: the minimum air flow 15m3 / min; minimum static pressure 50mm / Aq

5, processing maximum size: 1250mm * 650mm

6, processing minimum size: 105mm * 105mm

7, Thickness: 0.4mm ~ 3.2mm

8, precision: parallel precision ± 0.05mm, residual thickness accuracy: ± 0.05mm, Pitch: ± 0.05mm, Alignment of the upper and lower knives ± 0.05mm

9, machining position: first knife minimum of 8mm, single-side processing unlimited number of cutting line can be set arbitrarily.

10, machine-hop Cutter: Cutter machine processing can be set arbitrarily jump jump jump knife blade number and location.

11, residual thickness settings: machine has three types of residual thickness can be set to three different shades of a single surface residual thick.

12, machine structure: one machine base design using casting methods to ensure stable machine performance.

13, machine size: L2400mm * W1900mm * H1600mm

14, machine weight: 3800KG

The operating system

1, The machine uses Microsoft WindowsXP system, Chinese and English operation interface, Easy to operate . Parameter setting procedure is simple. First, Set the board size , Then setting the position data of the cutting line . Finally Set of the residual thickness of cutting , then complete the processing.

2, The machine displays including Machine showed pictures and data. real-time tracking processing icon displays the current processing position, allowing the operator In real time to understand the whole process.

3, the machine has a test function, to avoid improper setting data sheet metal scrap, in the data set is completed After the first board with test function, test cutting short distance to check the cutting position and the actual position is consistent, as

Inconsistent correction processing parameters can be carried out.

4, Machine has a blades protective function, in order to avoid residual thick outer diameter of the tool set and improper settings blades damage.

Machine hardware configuration

1, both machines were imported each axis servo control system to ensure the stability and performance of the machine precision, push plate axis, Cutter shaft and the upper and lower blade shaft using servers and servo motors, servo wheel servers and servo motors.

2, The main control board is the United States six axis motion control card.