60L PCBA Offline Cleaning Machine For SMT Line For Rosin Flux, No-Clean Flux

SME-5600 PCBA Cleaning Machine Introduction

SME-5600 is an energy-saving, environmental protective, integrated, high-end cleaning machine. It can automatically complete cleaning, rinsing, drying process in one chamber by just push the start key.

SME-5600 main application: Car electronics PCBA, Military PCBA, Aerospace PCBA, Telecom PCBA, Medical device PCBA, Digital meters PCBA.

For Rosin flux, No-clean flux,Water-soluble flux , Solder paste ball and other organic and inorganic pollution materials on SMT and THT PCBA.

PCBA Offline Cleaning Machine SME-5600

1. SME-5600 Structure

3. 3 steps main process

Liquid Clean ---- DI water Rinse ---- Hot air Dry

Upper/middle/lower 3pcs, 360° rotation spray rods, 2 layers cleaning baskets

4.Flow chart

In general, the cleaning process parameters are: cleaning time (10-20) min, rinse time (1-2) min, rinse times (3-5) times, drying time (20-30) min, cleaning temperature (40 -60) ℃, rinse temperature (room temperature), drying temperature (70-95) ℃, so the general completion of a cleaning process time (40-60) min, under special circumstances according to the actual situation

5.Technical Spec

6-1. Features

1. the whole process visible : the cleaning process can be visible through the front window and LED light.

2. automatic cleaning mode: clean, rinse, dry process can complete in one compact machine.

3. the most scientific nozzle design: the use of left and right incremental arrangement --- to enhance cleaning efficiency,back and forth movement of basket - completely solve the cleaning blind area;

4. the nozzle pressure adjustable design: to solve the small and light PCBA in the high pressure spray under the conditions of the collision, splash problem;

5. the standard dilution tank heating system: greatly improve the cleaning efficiency. Shorten the cleaning time;

6. a comprehensive cleaning system: for SMT; THT PCBA after welding the surface of the residual rosin, water-soluble flux, no-clean flux / solder paste and other organic and inorganic pollutants for thorough and effective cleaning;

7. convenient cleaning dilution to add: can be manually added, but also by setting the ratio (5% to 25%) automatically with DI water and chemical liquid (option);

SMT Cleaning Machine

Pneumatic stencil cleaning machine SME-750 Electric stencil cleaning machine SME-800

Soldering wave oven pallet cleaning machine SME-5200 Mis-print PCB cleaning machine SME-210

Squeegee cleaning machine SME-220 Nozzle cleaning machine SME-24

PCBA in line cleaning machine SME-6200 DI water machine DI-1000