The GSE fully automatic high precision solder paste printer is a high-end model forSMT high-end application,which can satisfy the printing process requirements of high precision and high speed
Substrate processing | G5 |
Maximum board size | 400*340mm |
Minimum board size | 50*50mm |
Board thickness | 0.4~6mm |
Maximum board weight | 3Kg |
Board edge clearance | 2.5mm |
Board height | 15mm |
Transport height | 900±40mm |
Transport speed | 1500mm/s(Max) Program Control |
Transport direction | One stage |
Board clamp | Manual the top clamp |
Side clamping | |
Spport System | Magnetic Pin |
Support Block | |
Manual up-down table |
Printing Parameters | G5 |
Snap-off | 0-20mm |
Print Mode | One/Twice |
queegee Type | Rubber/Steel Squeegee Blade(angle 45/55/60) |
Print Speed | 10~200mm/sec |
Print Pressure | 0.5~10Kg |
The template frame size | 470*370mm~737*737mm |
Cleaning Parameters | |
Cleaning Methods | Dry,Wet Vacuum three modes |
Cleaning system | Up Drip type |
Cleaning stroke | Automatic generation |
Cleaning position | Post cleaning |
Cleaning Speed | 10-200mm/sec |
Cleaning fluid consumption | Auto & Manually adjustable |
Cleaning paper consumption | Auto & Manually adjustable |
Machine parameter | |
Power Source | AC220±10%,50/60Hz2.2KW |
Air Pressure | 4~6Kgf/cm² |
AirConsumption | Approx:5L/min |
Operating Temperature | -20℃~+45℃ |
Working environment humidity | 30%~60% |
Machine dimension (without Tower light) | 1404(H) mm |
Machine Length | 1140(L) mm |
Machine Width | 1362(W) mm |
Machine Weight Approx | Approx: 900Kg |
Equipment load bearing requirements | 650Kg/㎡ |