SMT Nozzle Cleaning Machine YSL-24 YSL-36

Introduce of SMT Nozzle Cleaning Machine

With it special mechanical design,YSL-24 using the hydrodynamic water fragmentation, producing very fine water mist, with the speed of sound (V = 360m/s) to form a strong momentum jet to the nozzle, nozzle for cleaning at the top of the formation of a continuous field, crushing the internal surface of the dirt (the nozzle will not be damaged because of its independent device),during the cleaning process the used cleaning water (deionized water or distilled water)automatic direct emissions.

Features:

1.Clean 24 nozzles in one time, quicker and more efficient.

2.Replace traditional manual clean, avoid troubles caused by ultrasonic cleaner, reduce rejection rate.

3.To clean the dirt completely which ultrasonic cleaner can not deal with.

4.Cleaning result will not affect by the smaller and smaller nozzle.

5.Thoroughly clean 99% dirt on nozzle, extend the lifespan of nozzle.

6.Protect the coating surface of nozzle and its reflection panel.

7.Never use solvent, only environmentally friendly DI water is enough.

8.Easy operation.

9.Applicable to all kinds of Mounter nozzles, especially on corss, I-shape, odd-shape nozzles.

Precautions:
1.Never open the inlet cover of the water tank during cleaning process, water will be spray out with high water pressure.

2.Please use DI water or distilled water,never use mineral water or tap water.

3.Blow and make the remain water in the cleaning tank by using air gun after cleaning.

4.Please check whether nozzles is set right on to the jig hole each time.

5.Please aviod hit the stretch cyliner jet head when placing nozzle jig onto the rotation plate; the concentricity of the jet heads and nozzle jig is adjusted and set by beam sensor in our factory, if hit is not serious, it will not affect the concentricity; if hit seriously and affect the concentricity, please contact us or our agent for right adjust method.

6.Please replace the air filter each year. The regular filter replace time is 1 year but it supple sources of factory; If filter turns yellow or black, it must be replaced right now.

Specification of PCBA Cleaning Machine

YUSH Electronic Technology Co.,Ltd was founded in 2005,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry.

Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China.