Robot Soldering Machine with High Precision Stepper Motor for PCB

Introduction

This automatic soldering machine is a desktop model soldering robot, the machine adopts stepper motor and timing belt driven system. The whole machine assemblyed with high quality precision Hiwin linear guide and Airtec cylinder. The PCB or product which need to be soldered is fixed by the customized fixtures. The machine with spot welding, pull welding,automatic cleaning and location corrective,reproduction,array,automatic positioning and so on. Also the machine is easy maintenance and operation, great improve the production efficiency.

Features

1, 4Axis working, X/Y/Z and R rotation moving, achieve many angle soldering purpose.
2, Robot instead of powerman can save much more labor cost.

3, The soldering head can be multi-directionally adjusted, which can protect the PCB and components from damage.

4, The machine support sopt welding, drah welding.
5, Use the Iron head as the base point to align the key position of the product, press the enter key, the program will automatically generate this point in the system,then setting the data about the point and so on.
6, Using high precision stepper motor and timing belt driven system, and advanced motion control algorithms to effectively improve motion positioning accuracy and repeatability.

7, The machine with automatic cleaning function, which can make the solder processing more stable, and extend the lifespan of the solderin iron.

8, With the handheld LCD teaching pendant, the programming is simple and easy to learn.

Operation Precautions

1. When adjusting the temperature, please adjust the temperature of the soldering table according to the items to be soldered, so as to avoid the temperature being too high or too low, which may lead to the failure of soldering.
2. When soldering, please hold the soldering iron tightly to avoid uneven soldering spots caused by hand shaking.
3. When soldering, please don't use too much solder on the same soldering point, so as not to make the soldering point bigger.
4. Please use a solder sucker to clean up the solder, so as not to affect the next welding.
5. If repairs are required due to equipment maintenance, you must apply to the administrator for use and return it with a record upon completion.

Specification