Brand New Standard Type K TC Connectors KIC 2000 Thermal Proflier With 9V Alkaline Battery

Introduce

The KIC 2000 Thermal Profiler is a heat treatment monitoring device used in Surface Mount Technology (SMT) processes. It is widely used in the electronic manufacturing industry to monitor and record the temperature profile of PCBs during processes such as thermal reflow soldering and hot air ovens to ensure the quality and consistency of the placement process.

The KIC 2000 Thermal Profiler has the following key features and functions:

1.Temperature monitoring: The device is equipped with multiple temperature sensors that can monitor and record the temperature changes of the PCB during the SMT process in real time. The sensor can accurately measure and record key parameters such as the PCB's maximum temperature in thermal reflow or hot air oven, and the temperature profile of the preheating and cooling processes.

2.Data recording and analysis: KIC 2000 Thermal Profiler can record large amounts of temperature data and analyze and generate reports through software. Users can view and analyze temperature curves, peak temperatures, temperature gradients and other data as needed to evaluate and improve the performance and stability of the SMT process.

3.Process optimization: By collecting and analyzing temperature data, the KIC 2000 Thermal Profiler can help users optimize the SMT process. Users can perform parameter adjustments and process optimization based on the analysis results of the temperature curve to improve placement quality, reduce welding defects and improve production efficiency.

4.Real-time feedback: KIC 2000 Thermal Profiler can provide real-time temperature feedback and alarm functions. Users can set temperature thresholds, and once the temperature exceeds the preset range, the device will sound an alarm so that corrective measures can be taken promptly to avoid problems and defects during the placement process.

5.Easy to operate: The device has a simple and easy-to-use operation interface and a user-friendly software interface. Operators can easily set monitoring parameters, view real-time data and generate reports without complex operations and programming.

Features

1, Transmit reception frequency: 433.92MHz

2, Full Original Package, with original Thermal Couples, Protective Shield, Software, etc

3, Technical Support and Warranty from USA

4, Thermal Process Optimization for Lower Energy Use

5, Standard SPC charting software include CpK, Help reveal change in the profile over time

6, Standard Profile Overlay, show different process.

7, Robust and Compact Hardware with 1 year warranty

8, 9 and 12 Channels (Standard Type K TC connectors)

Specifications

Operating Methods

1.Firstly, check whether the battery power is sufficient, if it is lower than 20% you have to charge it first, secondly, if the surface temperature of the instrument is higher than 45℃C please don't charge it, try to charge it at room temperature.
2. Typical causes of problems when establishing communication links:Communication cable not fully inserted - make sure the correct jack is used. Communication cable or connector is damaged - check for breaks or other damage. Battery is not charging I Charge. and make sure the charging LED is on.
3. The thermal barrier can withstand a maximum of 9 minutes at 280° C. Be sure to exceed this range and ensure that the internal temperature of the instrument does not exceed 85° C.
4. When not in use for a long time, please observe whether the data indicator light flashes every 5 seconds or so, if it does, please press and hold down the "start" end key for about 5 seconds until the indicator light suddenly flashes, and then observe it until there is no light flashing.
5. Please make sure to cover the heat insulation box when crossing the furnace, and wait for the time to arrive.
6. You can only connect one Oven Tester logger to the computer at a time. Can not be connected to the computer at the same time more than one recorder to the same USB port and then choose one of them.
7. After a furnace again over the furnace, and so on the thermal barrier box cooled down before use.