New Design Chip Mounter Nozzle Cleaner SMT Cleaning Equipment For Nozzle Cleaning And Drying

Introduce

The nozzle cleaning machine is a cleaning equipment that replaces the traditional use of steel needles or ultrasonic vibration to clean the nozzles. The dirt on the suction nozzle that could not be removed before can be removed in a short time. And the nozzle will not be damaged during the cleaning process. Since it uses non-toxic and harmless cleaning fluid, the whole process is more environmentally friendly.

Automatic Nozzle Cleaning System. With the development of SMT, miniaturization and high-density mounting of components have become a trend. Subsequently, the nozzle of the SMT placement machine is more precise and has a greater impact on placement quality. During the actual mounting process, the nozzle is clogged due to contamination of solder, flux or other contaminants, which can easily cause material to be thrown away. Previously, we could no longer solve the problem by poking with steel needles or using ultrasonic shock.

The nozzle cleaning machine developed for this situation uses a new cleaning method, which can remove dirt on the nozzles that could not be removed in a short time. And the nozzle will not be damaged during cleaning. Since non-toxic and harmless cleaning fluid is used, the whole process is more environmentally friendly.

Efficient vacuum cleaning
Adopt powerful vacuum device with rotating brush
Can quickly and effectively remove pollutants such as tin slag and dust accumulated on the surface of the nozzle
Ensure the nozzle is in the best condition and improve the accuracy of patching

Fully automated operation
The entire cleaning process is fully automated
Set cleaning parameters through computer control system
Improve work efficiency and reduce labor costs

Intelligent detection
Equipped with high-precision sensors
Real-time monitoring of nozzle status, automatic judgment of cleaning needs
Intelligent control of cleaning frequency to maximize equipment utilization
Pollution-free and environmentally friendly

Adopt closed studio design
Use harmless clean gas, will not cause any damage to the patch machine
The whole process is green and environmentally friendly, in line with relevant safety standards

High applicability
Compatible with various types of patch machine nozzles
Cleaning speed can handle 10-20 nozzles each time
Widely used in SMT production lines

Easy to maintain and integrate
Modular design for easy daily maintenance and replacement of consumables
Can be integrated with production management system to achieve remote monitoring and parameter setting

Specification