Selective Soldering System From China with Full Computer Control,Highest Flexibility​​ Product Description

1. Solution configuration:

Double-head spray + preheating welding (double cylinders can lift independently) + preheating welding module (double cylinders can lift independently) + preheating welding module (double cylinders can lift independently)

2. Composition:

(1) Spray module: X/Y-2-axis servo-driven spray head movement, adjustable position, precise positioning, selective precision spray (double head);

(2) Preheating module: upper hot air/lower infrared preheating.

(3) Welding module: dual-cylinder Z-axis independent lifting.

(4) Direction: left in and right out;

3. Through programming, the spray module selectively and precisely sprays each solder joint. After preheating by the preheating module, the welding module selectively spot/drag welds each solder joint. The welding of each solder joint Parameters can be adjusted independently;

4. The welding parameters of each solder joint (such as flux spray volume, welding time, welding wave peak height, etc.) can be set independently;

5. Full computer control, parameters are set and saved on the computer, configuration files are generated for easy traceability and storage, and the welding process is monitored and recorded in real time

Full computer control, parameters are set and saved on the computer; configuration files are generated for easy traceability and storage; real-time monitoring is implemented throughout the process.

Selective Soldering System From China with Full Computer Control,Highest Flexibility​​

1. Precision spray module:

(1) Motion control: X/Y axis servo control;

(2) Positioning accuracy: ±0.2mm;

(3) Spray diameter: 2...8mm (nozzle aperture: 130μm);

(4) Spray method: selective precision point spray or line spray;

(5) Flux pressure tank capacity: 5L;

(6) Number of spray heads: 2PCS

2. Preheating module:

(1) Segmented modular layout;

(2) Preheating is flexible and energy-saving;

(3) Top hot air preheating with good uniformity;

(4) Bottom short-wave infrared preheating, high preheating efficiency;

(5) Set temperature: room temperature -200℃;

(6) The preheating time and temperature can be set.

3.Welding module

(1) Motion control: X/Y/Z axis servo control;

(2) Positioning accuracy: ±0.15mm;

(3) Tin wave height: 0-5mm controllable, automatic detection and correction;

(4) The tin wave height calibration interval program can be set;

(5) Tin temperature real-time monitoring and alarm;

(6) Real-time monitoring of liquid level, low liquid level alarm;

(7) Nitrogen protection, very little tin slag;

(8) The nozzle and base are magnetically connected and aligned and can be quickly replaced;

(9) Tin furnace capacity 11kg;

(10) Maximum soldering temperature: 350 °C;

(11) Electromagnetic pump.

(12) Number of tin furnaces: 2PCS

More information welcome to contact us:

Email: s5@smtfly.com