150 Diameter Diamond Grinding Wheel For Pcd/Pcbn Grinding With Competitive Price
| Product Name | Custom size metal bond OG grinding wheel |
| Model | CPTODTGH |
| Brand | CTSTC |
| Size | Customized |
| Body Materials | Iron/Aluminum/stainless steel |
| Bond | Metal |
| Abrasive | Diamond |
| Grit | 60#---320# |
| Technique | Sintered |
| Tooth Profile | Continouns/Segment/Groove |
| Usage | Grinding, sharpening, polishing |
| Shape | Flat Shape |
We offer various grinding wheels for rough and fine grinding which are suitable for all grinder.
The vitrified bond diamond grinding wheel produced by our company has complete product specifications, and the processing cost of single part is 50 ~ 80% lower than that of other grinding wheels. Long service life of grinding wheel is 30-200 times that of ordinary grinding wheel. Grinding has the characteristics of high processing efficiency, high precision, no burn, crack and annealing softening phenomenon, small wear, long life and low processing cost.
Applications:
PCD diamond tools, PCBN cubic boron nitride tools, PCD/PCBN blanks, tungsten steel carbide tools, alumina, zirconia, silicon carbide and other functional ceramics
Diamond grinding wheel size :
| Type | Size | Width | Grit size |
| 6A2 | 150*40*40*5*8mm | 5mm | W5 |
| 6A2 | 150*40*40*10*8mm | 10mm | W5 |
| 6A2 | 150*40*40*15*8mm | 15mm | w5 |
| 6A2 | 150*40*40*20*8mm | 20mm | w5 |
How to order grinding wheel
1, Choose the right binder:
A,resin bonded grinding wheel : High bonding strength, elastic to a certain extent, poor heat resistance, coolant is not easy to enter.
B,vitrified bonded grinding wheel: The porosity is high, the coolant is easy to enter, and the dressing is easy.
C,electroplated bonded grinding wheel: There are many sand grains and high teeth exposure, so grinding efficiency is high.
D,metal bonded grinding wheel: Sand high bond strength, very wear - resistant, difficult to repair.
2,Choose the right abrasive:
A,Dianmond: It is the abrasive with the highest hardness. However, during the processing of iron workpiece, due to the heat generated by grinding, iron and diamond will react and destroy the diamond, so it is not suitable for the processing of iron workpiece.
B,CBN: Second only to diamond in hardness, suitable for grinding all kinds of steel above HRC40.
3,Choose the right abrasive grit size
4,Select the shape and size of the grinding wheel
5,Tell us what equipment you use to process what materials? including but not limited to:
A,device name
B,Equipment model
C,rubbing way
D,What kind of coolant
E,grinding allowance
F,amount of feed
G,Speed of grinding wheel
