Fiber Optical telephone converter 4POTS with 100M ethernet multiplexer
Product Overview
This is a desk-top PCM multiplexer which provides 1-4 channel FXO/FXS telephone, 1Channel 10M/100M Ethernet interface (Line Speed 100M),wall-mouthed or 4U rack plug-in , support the SNMPA service.
Features
Technical parameters
Optical port | Multi-mode | 50/125um,62.5/125um |
Max transmission distance:5KM 62.5/125um single mode fiber,attenuation(3dbm/km) | ||
Wave length:820nm | ||
Transmitting power:-12dBm(Min)-9dB(Max) | ||
Receiver sensitiveity:-28dBm(Min) | ||
Link budget:16dBm | ||
single-mode | 8/125um, 9/125um | |
Maximum transmission distance: 40Km | ||
Transmission distance: 40KM@9/125um | ||
Wave Length: 1310nm | ||
Transmitting power: -9dBm (Min) ~-8dBm (Max) | ||
Receiver sensitivity: -27dBm (Min) | ||
Link budget: 18dBm | ||
Ethernet interface | Interface rate:10/100 Mbps,half/full duplex auto-negotiation | |
interface standard:Compatible with Ieee802.3,IEEE802.1Q9(VLAN) | ||
MAC Address Capability:4096 | ||
Connector:RJ45,support Auto-MDIX | ||
FXS port | Ring voltage:75V | |
Ring frequency:25HZ | ||
Two-line impedance:600 ohm(pick up) | ||
Return loss:40dB | ||
FXO Switch port | Ring voltage:35V | |
Ring frequency:17HZ-60HZ | ||
Two-line impedance:600 ohm(pick up) | ||
Return loss:40dB | ||
EM 2/4 Line | AD:odB | |
DA:-3.5dB | ||
Two/Four-line impedance:600 ohm | ||
Return loss:20dB | ||
Power | power supply:AC180V-260v;DC-48V;DC+24V | |
Powerconsumption:≤10W | ||
Dimension | product size:Mini type 216X140X31mm(WXDXH) | |
Simple packaging Size: 274X193X84mm(WXDXH) | ||
Piece Weight :2KG per pair | ||
Working environment | working temperature:-10°C ~ 50°C | |
Working Humidity:5%~95 % (no condensation) | ||
Storage temperature:-40°C ~ 80°C | ||
Storage Humidity:5%~95 % (no condensation) |
Networking Application:
Point to point solution,both port can put in 1-4channel telephones , 1channel 10M/100M fast Ethernet interface( Line Speed 100M).