AW BW NW HW Drill Rod Carbon Steel Geological Equipment For Drill Steel Rod

Another challenge associated with diamond drill rods is their weight. Because diamond is such a dense material, diamond drill rods can be quite heavy, which can make them difficult to maneuver and transport. This can be particularly problematic in remote or hard-to-reach locations, where access to heavy equipment may be limited.

Features of Casing Pipe
1) Use optimized buttress thread so that the connecting strength can reach the strength of the pipe body.
2) High seal reliability: this product has the multi-seal configuration.
3) The joint has high capability to resist compression, bending and over-torque load with the reverse torque internal shoulder.
4) Energy loss reduction: the air and liquid turbulence are reduced by the inner flat design.

PQ drill rod features:
TUBES
-High quality alloy steel tubes
-Consistent concentricity, straightness and heat treatment
THREAD
-Tapered and course threads provides easy make and break
-PQ thread provides sufficient strength
CASE HARDENDING
-PQ drill rod has case hardened thread.
-PQ drill rod pin thread crest is hardened to nominal HRC 55 to eliminate damaging adhesion wear
-Eliminates the transfer of wear material back and forth which is what happens
between threads of equal hardness, leading to large scale galling and joint seizing.

PQ drill rod configuration: 1-PQ drill rod overview 2-PQ drill rod box and pin thread profile 3-PQ drill rod case hardened illustration NOTE: (1)1.5 m/5 ft and 3 m/10 ft PQ drill rods are available.

PQ Drill Rods Package Specifications

3.0 m/10 ft Rod Bundle (25 Rods)

Dimensions (L x W x H) 3100 x 700 x 750 mm

Volume 1.63 m3

Gross Weight 1315 kg

1.5 m/5 ft Rod Bundle (25 Rods)

Dimensions (L x W x H) 1600 x 700 x 750 mm

Volume 0.84 m3

Gross Weight 665 kg

Container Shipments:

20 ft container load of 3.0 m/10 ft rods holds 12 bundles (around 300 rods)

40 ft container load of 3.0 m/10 ft rods holds 18 bundles (around 450 rods)

Our Services:

Ø Provide the technical design and solutions;

Ø Designing and manufacturing of non-standard equipment;

Ø Professional technical training and guidance on site according to the contract;

Ø Supply accessories at any time;

Ø Tele-technical consulting and services;

Ø Other special technical service according to client's requirements.

We specialized in producing of varies diamond drilling tools, such as impregnated/surface-set diamond core bits, diamond casing shoes, diamond rod shoes, reaming shells, TC core bits/casing shoes/TC rod shoes, PDC bits, Thin Wall Bits, core lifters, core lifter cases, core barrels, and kinds of drilling rigs etc.