Size Customized Automotive Protective Film Uv-Resistant Anti-Scratch For Car Marine Vessel Hood

Discription:

Following the same formulation of other main film, RH1801 automotive car paint protective film was created to provide ample protection with a slightly thinner construction. It's 0.07mm thick enough to be used on exterior & interior surfaces alike, offering the same self-healing technology.

Vinyl Technology: Using high polymer PVC vinyl, high flesible and resistance to solvents, super stretchability and weather resiatance.

Super Polyacylate: Firmly adhered without degunmming. permanent removable.
Super Air Release: Super high-desity air channels, dry application no air bubbles, exclude air very fast.

Stretchable Ability: up to 3 times ductility strch does nnot change color dose not break perfect fit to large arc body.

Recoverable Ability: do not damage the car paint after remove protection the car paint always as new keep the car in value

Long Durability: outdoor durability up to 1 years, resistance high and low tempaerature as well as UV resistance.

Technical Data:

Automotive Car Vinyl Protective Film White Self- adhesive For Vehicle Vessel Interior

Feature:

★ Invisible and high clarity
★ Self-healing of the tiny rub and scratches
★ Stain and solvent resistance , isolating acid rain,asphalt ,bird dropping etc
★ Waterproof , no water spot remain
★ Durable , anti-yellowing
★ Flexible and easy installation ,100% safely removable ,no adhesive residual

Application:

►The protective film can highly prevent headlights from either yellowing too soon or from road hazards. Don't worry about the bubble when applying the film, it is easy to install with a heat gun, soapy water.

►Most of the front bumper is painted and the application of the film can protect it from rock chips. Apart from bumber, front bumper, headlights and front grill emblem, the films are workable as the shiel
of cars, hood, headlights, rear bumper, lower car door jam and other areas.

►We sincerely provide with good quality assurance, fast delivery, and after-sales service to meet your requirements as much as possible. If you encounter any problems, feel free to contact us, we will do our best to provide the best service and will respond within 24 hours.

Quality Assurance:

1. Check raw materials before blowing.

2. Checking each roll before cutting.

3. Perform random checks before packing

How to Paste:

1. Clean the place you want to paste, make sure that no impurities or wax or something.
2. With a fine sprinkling the surface of the wet.
3. Peel the paper off the sticker, ready to paste.
4. Scraped off with a scraper to sprinkle fine, you can use a hard car.
5. Trim the corner excess portio.
6. Gun with roast bake flat corners, and you're done with a good scraper scrape.

Package & Delivery:

1.Rolling up the film with paper cylinder.
2.Cover with transparent film per roll.
3.Packed into white or customized box.
4.Two rolls into one more bigger carton, better protect films during shipping.

Why Us:

For more information on how to select protective films, or to get some samples shipped to you today, Please contact us through phone or e-mail :)