1.Place the knife holder on the table, hold the knife holder itself with one hand, pull up with a little force with the other hand, and then take out the plastic board behind the magnetic knife holder.
2.If it is installed on the refrigerator, you can directly connect the knife holder to the surface of the refrigerator, and the magnetic knife strip will be firmly adsorbed.
3.If you want to install the knife holder on the wall, you can first confirm the position you need to install, and the horizontal position of the two mounting screw holes on the wall,and you need to use the recessed holes and drilled holes to make holes in the wall.
4.Use the provided screws to screw the back plate into the wall together, and fix the back plate on the wall.
5.Finally attach the magnetic knife holder to the back plate.
6.The Magnetic knife holder installation is complete.
Hazard Warning:
Be careful not to pinch your hand when attaching the magnetic knife holder to the board!
