GMP Factory Cleanroom static dynamic pass box Pharmaceutical pass box with uv Clean Room Equipment

Product Description:
1, laminar flow transfer window cleanliness requirements: B;
2, the internal and external double-layer shell, around the internal arc processing, ensure no gap junctions;
3, adopts the design of laminar air flow by giving next time pattern, design, manufacture of stainless steel (304) at the bottom of the punching and set the stiffener;
4, filter: early efficient filter USES G4, high efficiency filter use H14;
5, wind speed: after hepa filter out of the wind speed control in 0.38 0.57 m/s (below the outlet air flow efficient board 150 mm test);
6, the differential functions: display filter differential pressure (range efficient effect in 0-500 pa / 0-250 pa), accuracy + / - 5 pa;
7, control function: fan start/stop button, the configuration built-in electronic door interlock;Set the uv lamp, design a separate switch, when the door closes, two uv lamp should be for open;Set lighting, design a separate switch;
8, efficient filter can be separate from the upper body to remove and install, easy to maintain and replace filter;
9, set up the access port at the bottom of the transfer window, used for repair of the fan
10 ,noise: transfer window during normal running noise < 65 db;
11, efficient wind flow board: using 304 stainless steel plates.

Product feature:
1.The surface material of pass box is cold rolled steel or stainless steel.
2.The inside material of pass box is stainless steel, it can prevent scratches and keeps the pass box flat, neat and wearable.
3.Doors in two sides with mechanical or electronic interlock.
4.Adopt mini-pleated HEPA filter,efficiency:99.99%@0.3μm.
5.The wind speed of nozzle above 20m/s
6.According to production process requirement, it can install efficient sterilization lamp.