DPP260 Alu PVC And Alu Alu Pharmaceutical Blister Packing Machine Pharma Equipment Automatically

Description:

1. Travel scope can be adjusted.

2. Alu Alu Blister Packaging is available for this machine.

3. Mould is located by locating groove which makes it easy to change mould. The machine heats the PVC through conduction and forms it through pressing and frothing.

4. The material is fed automatically. The mould and feeder can be designed as user’s requirements.

5. Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller, it can synchronize accurately.

6. Adopt the equipment of trace pressing, batch number printing and scarp-collecting.

7. Stepping motor Pulling Material more accuracy and easy adjusting

8. The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life.

Applications:

The machine is new product which is improved based on customer’s requirements. It’s suitable for packaging of all kinds of liquid and solid in large & medium pharmaceutical factory, health medicine factory, hospital preparation lab, food industry, electronic industry, hardware industry, etc. It can protect the material from steam or dust, improve product packing degree, and increase the additional value. The machine is used to produce large quality and single product.

Main Technical Data:

Feature:

l Travel scope can be adjusted.

l Mould is located by locating groove so that it’s easy to change mould. Adopt the moulds of pressing-and-frothing and cool-forming.

l The material is fed automatically. The mould and feeding equipment can be designed as user’s requirements.

l Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller.

l Adopt photoelectric empty-detecting equipment and waster-eliminating equipment.

l Servo motor drive wheel to grip and tow wrapper, synchronize accurately. And it will be not waste of time and material for adjusting when restart the machine.

l The machine equipped Camera Cell for sensor, make the length in an accurate number.

l The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life.