Durable Pill Capsule Filling Machine Capsule Filling Equipment With Low Noise

Product Description of Capsule Filling Machine ​

The maximum capacity is 3500 grains per minute. Product standardization and series production: The universal interchangeability of manufactured parts reaches over 98%, and each component has a fixed code. The positioning holes for mold replacement parts have high accuracy in positioning and repeated positioning; Quick mold change, easy operation, and convenient cleaning.

Technical Parameters of Capsule Filling Machine ​

Features

High-capacity HD can be record message,meet CGMP,FDA certification

With Japan imported beeline bearings,make sure the machine long work life and precision of machine

The working station cam runs under the good lubricating condition and maintaining the inner lubrication of cam slot to a full extent,increasing the pressure pulverization oil pump,extends the operation life of the spare parts Single movement for both upper and lower segments with two lip seal provide a much better sealing performance

Adopt the PLC and touch screen control,step-less frequency conversion motor,all parameter can be set up in the touch screen,make the operation very convenient

Three-dimensional adjustment of the dosing disk, space uniform, to ensure accurate filling, the capsules yield up to 99%

It has a protector for operation and machine,can auto pause when the machine lack of capsule or powder,insure the machine running stable,safe.

Add the mold blowing air,sucking air function,insure the mold hole without dust when fill the capsule.

Working Principle of Capsule Filling Machine

The working principle of the automatic capsule filling machine is divided into two parts, which are the movement of the capsule and the filling of the medicine:

1. Movement of the capsule
During the filling process of the intermittent capsule filling machine, the movement of the capsule depends on the indexing box for intermittent and discontinuous rotation. The filling volume of the capsule is mainly determined by the volume of the metering

disc hole. The hollow capsule is in the capsule hopper, the main board moves up and down, the capsule enters the capsule guide groove by its own gravity, and then the horizontal fork and the vertical plug make the capsule cap upward and the

capsule body downward into the upper and lower modules. The capsule body and capsule cap are separated under the action of the device, and then the module enters the powder filling station.

2. Drug filling
The sensor in the powder holding ring controls the screw feeding rod above it, and the medicine is continuously added to make the height of the powder in the powder holding ring constant. position, push the drug column into the capsule body. After that, it

enters into the capsule rejection, capsule locking, finished capsule discharge, module cleaning station in turn, and then enters a new round of station cycle, and the cycle begins again and again.

Application of Capsule Filling Machine