Dual Channel PH / ORP Analyzer Access To 2 Electrodes IP66 For Swimming Pools
Product Introduction
The DRFN’s dual-channel PH/ORP analyzer can simultaneously access to 2 sensors, PH or ORP electrode. The instrument can display 4 detection data including temperature. The PD600 PH/ORP controller has 2 settable SPST multi-function relays and 2 high-precision 0/4~20mA current outputs. It can meet PH/ORP monitoring, dosing control, and data signal remote transmission at the same time.
The dual-channel analyzer is widely used in swimming pools, water parks, and other industries.
Product Advantages
Technical Parameters
Product Name | Dual-Channel PH/ORP Analyzers |
Product Model | PD600-A |
Software Version | DRFN Multi-parameter analysis softwareV1.0 |
pH Sensor | Glass pH sensor |
ORP Sensor | Redox potential sensors (platinum/gold sensors) |
TEMP | PT1000 or NTC10K |
PH Measure Range | -2~16pH |
ORP Measure Range | ±2000mV |
TEMP Measure Range | -10~150℃ /14~302℉ |
pH Resolution | 0.01pH |
ORP Resolution | 1mV |
TEMP Resolution | 0.1℃/ 0.1℉ |
Accuracy | 0.1% of measurement range(or PH:±0.02pH /ORP:±2mV)take the bigger one |
Stability | 0.05% of the measurement range every 24 hours, no accumulation |
Repeatability | Better than 0.1% of the measurement range. |
Sensor Self-diagnosis | image displays with a short buzzer alert |
Relay Control | 2 configurable SPST relays with a maximum relay load of 3A/250VAC. |
Analog Current Output | 2 settable 0/4~20mA active current loop outputs with a maximum load of 1000 ohms. |
Communication Method | Two-wire RS485 interface, communication protocol: MODBUS RTU; support JSON text data format |
Display Screen | 128*64 black and white graphic dot matrix LCD display with adjustable backlight mode and adjustable display rate. |
Configuration Information | Power failure protection with indefinite parameter retention |
Time History / Data | Year/month/day/hour/minute/second, 14000 historical data can be recorded, and the recording interval can be set between 1~999 minutes. |
Maintenance Record | Last 100 times |
Protection Level | IP66 |
Operating Environment | 0~60℃, |
Storage Environment | -20~70℃, relative humidity less than 95% RH (no condensation) |
Instrument Housing | Shell material: enhanced ABS; instrument size 144*144*120mm |
Installation Method | Wall mounting, pipe clamping, panel(opening size 138*138mm) |
Electrical Interface | The back end of the instrument is reserved for 3 M12*1.5 gland, wire diameter 3~6.5mm |
Power Supply | 100~240VAC |
Power Consumption | About 7W |
Instrument Weight | About 800g |
If you are interested in our product dual-channel PH/ORP analyzer, please contact us.