Chlorite Sensor Water Quality Probe Amperometric 3 Electrode For Water Treatment
Descriptions
The measuring system of the water quality probe chlorite sensor MST1 is membrane-covered, amperometric 3-electrode system. It is used for the measurement of chlorite.The chlorite from acid/chlorite process, chlorine/chlorite-process chlorite/oxidant-process.You can calibrate the sensor via analytical determination of chlorite at the controller.
The pH range of the chlorite probe is 6 ~ 9pH. The measuring water temperature range is 0 ~ 40℃. The flow rate of the water quality sonde is about 15-30L/h.The membrane lifetime is normally 1 year (depending on water quality), the electrolyte should change every 3 - 6 months.
Specifications
Product Name | Chlorite sensor water quality probe |
Product Model | Chlorite sensor MST1 |
pH Range | 6 ~ 9 |
Pressure Range | 0 ~ 5bar, without outgassing, no pressure surges or fluctuations |
Temperature Range | 0~ 40℃ |
Run-in-time | First start-up about 24h |
Response Time | T90 1min. |
Connection | Modbus RTU with M12 male |
Shaft Length | standard 175 mm, and up to 220 mm in length (mA-Version) |
Material | PVC, Peek, stainless steel 1.4571, Microporous hydrophilic membrane, |
Flow Rate | 30 L/h |
Absence Of Disinfectant | Max. 24 h |
Applications Of Chlorite Sensor
Drinking water, swimming pool water, service water, process water.
Scope Of Supply
Water quality probe chlorite sensor MST1: sensor, membrane cap, electrolyte.
Ordering Data:
Type | Measuring range(ppm) | Resolution(ppm) | Output signal | Power supply | Item number |
MST1H-M0c | 0.05 ~ 2.00 | 0.001 | Modbus RTU | 9 ~ 30 V DC | 3326410 |
MST1N-M0c | 0.05 ~ 2.00 | 0.01 | 3326411 |
If you are interested in the water quality sonde chlorite sensor MST1, please contact us.