Automatic Cleaning Control Blue-Green Algae Sensor For Import Of Surface Water

The sensor has an automatic cleaning brush, which can be cleaned automatically and does not need to be cleaned frequently. Use tap water to clean the outer surface of the sensor. If there is still debris, wipe it with a damp soft cloth. For some stubborn dirt, you can add some household detergent to the tap water to clean. The probe contains sensitive optical and electronic components, so ensure that the probe is not subjected to severe mechanical shocks. Make sure that the sensor cable is not damaged, and must be replaced in time after damage. The cable should not be tight when working, otherwise the wires inside the cable will be easily broken, which will cause the sensor to not work properly; the contact part between the cable and the instrument is a weak point, so avoid folding the cable at a small angle.

Specification:

Please click the catalog of RS485 Blue-Green Algae sensor here:

Daruifuno Catalog.pdf

Features＆ Advantages

● Use the optical fluorescence principle
● Small size, easy to operate
● Fast detection speed, suitable for frequent and continuous measurements in the field
●RS485 digital interface, standard Modbus communication protocol, support access to standard industrial control system
● Have excellent repeatability and stability, and is not easily affected by ambient light
● With automatic cleaning brush, it can eliminate pollution coating and bubble accumulation, reduce the influence of measurement, and make the maintenance cycle longer

Aplication:

◇ surface water

◇ source water

◇ aquaculture waters

◇ landscape water

◇ import of the waterworks

FAQ

Q1. What is the measuring principle of the Blue-Green Algae sensor?
A: Using the Fluorescence method

Q2. What is the advantage of Blue-Green Algaesensor?
A: The digital chlorophyll sensor is conducive to long-distance signal transmission without serious signal attenuation. The sensor has RS485 interface, standard Modbus RTU communication protocol.

Q3.Can the Blue-Green Algae sensor connector be detachable type?

Our chlorophyll sensor has three options: Undetachable by default, detachablt, wateproof and detachable. Can be flexibly selected according to the needs of the site.

Q4: Are you the final manufacturer? And can we visit your factory?

A: Yes, We are manufacturer located in suzhou city, welcome to visit at any time.

Q5: Do you offer the OEM order ?

A: Yes, we can offer OEM service and label according to your requirements

Q6: How to make payment?

A: We accept T/T , credit card and West Union.