Widely Used - Increase Yields - Pipeline Pigging System - BJVP
Overview:
The very first BJVP pipeline pigging systems proved their worth in the mineral oil industry. BJVP pigging technology has also successfully been used in other areas for many years now, such as the pharmaceutical, food, paint, cosmetics and chemical industry. The decision to use a pigging systems is always based on sound reasons of economy; safety standards and environmental protection certainly also have a large part to pay. In principle, every pumpable product and also powders, granules and similiar substances can be pigged fully automatically, such as lyes, solvents, paints, oils, liquid resins, sludge ... and. Because of this,BJVP pigging systems are much more developed for pumping more and more new substances and for increasingly higher performance systems.
Characteristics:
The following functions can be realized through Pigging
Parameters:
Product Category |
Launcher Receiver Pig Stop T-way valve Three-way distribution valve 5D elbows Pig Pigging line Electric cabinet Control System |
Pipe Size | 1.5”~8” |
Pressure Standard | ANSI 150# |
Liquid Temperature | -52~380℃ |
Liquid Viscosity | 0.1~440,000 cst |
Material | WCB,CF8,CF8M,Alloy |
Port Type | ASME B16.5 RF |
Applications:
F&Q:
Q1: What can pigging system do in pipeline?
A: BJVP Pigging System can use the pig to clean the pipe line. There is no redidue and contamination between the different kind of liquid sharing the same pipe.
Q2: What is pigging equipment?
A: BJVP pigging equipment includes items such as high finishing pipe Pigging System, pig launcher/ receiver, middle station, pig detectors, pig, etc.
Q3: Where can this pigging system be used?
A: BJVP pigging equipment can be widely used in Lubricants and greases, paints and varnishes, special chemicals, perfumes and other industry applications.
Q4: How do pigs clean the pipelines?
A: Pig is pushed by forced air from the launcher to receiver, so the product and any residues in pipeline will be pushed out of the pipeline by pig.