Pigging Valve - BJVP - T-way valve and Three-way Valve
Overview:
Beijing VP’s pigging valves are designed to use a single PIG between multiple pipes. Compared to the traditional point-to-point pigging system, it can shorten the length and extend the service life of the PIG, hence save consumption and cost. More importantly, it avoids cross contamination of materials between multiple pipelines.
Parameters:
Port size | 1.5”-12” |
Pressure Standard | ANSI 150# |
Temperature | -52~380℃ |
Viscosity | 0.1~440,000 cst |
Material | WCB,CF8,CF8M,Alloy |
Port Type | ASME B16.5 RF* |
Features:
Advantages:
There are several advantages of pigging valves over conventionally fabricated barrel-style launchers and receivers. The footprint required to accommodate a pigging valve is considerably less than the barrel-style launcher. Simplistic in operation as you are now operating a single quarter-turn ball valve instead of numerous valves that are associated with the barrel style.
Safety is enhanced by the inherent features and built-in redundancy as well as the reduced number of steps to perform the pigging operation. You also won't be in the line of fire for a projectile situation with the pig. The pigging valve is environmentally friendly if you are venting to atmosphere as the volume of media can be reduced by up to 91 percent.
Maintenance is simplified with a substantial reduction in the number of valves and the overall size of the configuration. The Argus pigging valve is widely accepted by junior, intermediate, and major oil and gas producers around the world.
Pictures: