Pigging Valve - The Finest Materials -Double Block - BJVP

Overview:

The BJVP Pigging Valve is engineered and manufactured from the finest materials with advanced equipment and quality craftsmanship. BJVP pipeline pigging valves facilitate asset integrity, mitigate corrosion, and optimize oil and gas production.

Here are a few of our pipeline pigging advantages:

• Forged three-piece body design and construction are superior to castings
• Trunnion-mounted ball extends seat life and promotes ease of operation
• Double block and bleed construction facilitates the launch and receipt of bullet, scraper, and spherical pigs
• Environmentally superior to pigging tees and traps
• Designed for NACE, low-temp, liquid or gas applications with a standard temperature range of -50ºF to +250ºF (-46ºC to +121ºC)

BJVP pigging valve integrity is assured through A350-LF2 low-temperature forged steel construction, while uncompromised quality is secured under ISO 9001:2015 and API 6D certifications.

Parameters:

Features:

• Over-sized entry bore to accept swollen pigs
• Entry cap vent holes to provide positive release of trapped pressure before removal.
• Bleed valve connections (1/2" NPT) to facilitate a choice between venting and draining
• Integral Flanges
• Easy shop/field maintenance.
• Replacement parts and seal kits are readily available
• Positive stop plate is easily repositioned 90 degrees on the operating stem to accommodate flow direction.
• Operating stem is easily marked to verify the position of the ball
• Cap lugs ensure that pigs are fully inserted into the ball cavity eliminating binding when rotating the valve *- other standard available upon request.

Advantages:

There are several advantages of pigging valves over conventionally fabricated barrel-style launchers and receivers. The footprint required to accommodate a pigging valve is considerably less than the barrel-style launcher. Simplistic in operation as you are now operating a single quarter-turn ball valve instead of numerous valves that are associated with the barrel style.

Safety is enhanced by the inherent features and built-in redundancy as well as the reduced number of steps to perform the pigging operation. You also won't be in the line of fire for a projectile situation with the pig. The pigging valve is environmentally friendly if you are venting to atmosphere as the volume of media can be reduced by up to 91 percent.

Maintenance is simplified with a substantial reduction in the number of valves and the overall size of the configuration. The Argus pigging valve is widely accepted by junior, intermediate, and major oil and gas producers around the world.

Pictures: