2 Bolt Pillow Block Ball Bearing P206 High Speed Pillow Block Bearings

P206 pillow block bearing, Description,

1. The outer spherical bearing is actually a variant of the deep groove ball bearing, which is characterized in that the outer diameter surface of the outer ring is spherical and can be fitted into the corresponding concave spherical surface of the bearing seat to play a self-aligning role.

2. Although its basic performance is similar to that of deep groove ball bearings, because these bearings are mostly used in relatively rough machinery, the installation and positioning are not accurate, the axis of the shaft and the seat hole is poorly aligned, or the shaft is long and has large deflection In addition, the accuracy of the bearing itself is not high enough, and some structures are relatively rough, so the actual performance of the performance is relatively discounted for deep groove ball bearings of the same specification.

3. Top-spherical spherical bearings are used for through-shafts with poor rigidity and deflection. This type of bearing has sealing rings on both sides to prevent the intrusion of dirt. The factory has been filled with an appropriate amount of lubricant. It does not need to be cleaned or refilled before installation When lubricating, the top screw on the protruding end of the shaft inner ring is tightened on the shaft, the allowable axial load shall not exceed 20% of the rated dynamic load.

How to remove P206 pillow block bearing?

1. It can be disassembled. If it is disassembled, it can be reused. It is disassembled in a direction. If the disassembly direction is not correct, the bearing seat will be damaged.

2. Are the sleeves protruding from both sides not long on one side and short on the other? This side is also the same length. What should I do? Find the small protruding point of the outer diameter of the bearing, which side it is, remove the bearing there, prepare tools, cork hammer, and extend the end of the wooden handle. Enter the inner diameter, pinpoint the direction, and use force.

3. Because the outer diameter of the bearing is circular, it will be biased. When the bias is at its maximum, take out the end of the wooden handle and tap it lightly.

NSK pillow block bearing, Specification,

The other types of ball bearing pillow block,

1. Pillow block ball bearings including P type, UCP type, UCP type, UCF type, UCFL& LF type, UCPW type, UCFA type, UCC type, CCFB type ...

2. Just let us know the pillow block ball bearing model to require in price.

Application,

The pillow block ball bearings mainly work for agricultural equipment and the others.

Rated Products,

1. Besides pillow block ball bearings, we also support deep groove ball bearings,

2. Taper roller bearings, Spherical roller bearings, Cylinderical roller bearings, ball join bearings, needel roller bearings, Angular contact ball bearings,

3. Thrust ball bearings, self Aligning ball bearings, Clutch release bearings, linear Motion bearigns and cylindrical roller thrust bearings. If you need, welcome contact us for price.

Action contact us now for its price list,

If you need this thrust ball bearing or the other types of bearing, kindly action now to contact us by following 24hours online contact.

Welcome become our VIP custsomer to enjoy the special price.