6202 ZZ Deep Groove Ball Bearings Double Shielded Chrome Steel Bearings
Which is more demanding, 6202ZZ on the industrial fan motor or 6202ZZ on the ceiling fan motor?
1. The same type is the most popular and widely used type of bearing. This type of bearing is mainly used to bear radial load, but it can also bear a certain amount of axial load in any direction.
2. When the radial oil gap of the bearing is increased within a certain range, this bearing has the properties of an angular contact ball bearing and can also bear a large axial load.
3. After the deep groove ball bearing is installed on the shaft, the axial displacement of the shaft or the housing can be limited to the axial range of the bearing.
4. At the same time, when the housing hole and the shaft (or the outer ring to the inner ring) are relatively inclined, (no more than 8ˊ-16ˊ, determined according to the clearance), it can still work normally. Since there is a tilt, the bearing life must be reduced.
5. Life is slightly lower on ceiling fans.
What types of bearings are needed for motors in woodworking machinery? What type of bearing is needed on the equipment?
1. The bearings required for motors in mechanical equipment vary according to the design of woodworking machinery, but mainly used SUNTHAI miniature bearings, small deep groove ball bearings, linear bearings.
2. There are many bearings required on the equipment, such as: main shaft bearings, angular contact ball bearings, SUNTHAI deep groove ball bearings, self-aligning ball (roller) bearings, tapered roller bearings, etc. Common models such as: 6000 6001 6002 6003 6901 6803 6201 6202 6203 ... Of course, the bearings used are different according to different woodworking machinery models
What does bearing 6202 stand for
6 -- bearing type, representing deep groove ball bearing; 2 -- the width series is 2; 02 -- indicates an inner diameter of 15mm.
Its external dimensions are: inner diameter 15mm, outer diameter 35mm, width 11mm.
6202 2ZZ Deep Groove Ball Bearings Double Shielded Chrome Steel Bearings
Material | Chrome steel 9CR18 or carbon steel |
Cage | Brass, steel, nylon |
Bore Dia | 15mm |
Outer Dia | 35mm |
Width | 11mm |
Sample time | 3-5 days |
Services | OEM Accept |
Package | Neutral package or according to requirement |
Production time | It depends on the quantity |
Products Show
More Models
Our Application
Our Packaging
If you need, welcome contact us for price. Welcome your small order.