double tied expansion joint bellows Large pull rod transverse ripple compensator

Product description

(1) Large pull rod transverse ripple compensator, is a kind of used to compensate the bending pipe transverse displacement.

(2) small tie rod lateral compensator is also customarily called expansion joint, or expansion joint.It is composed of the bellows (an elastic element) forming its working body and accessories such as end pipes, supports, flanges and conduits.A small tie rod transverse compensator belongs to a compensation element.The effective stretching deformation of the bellows of the working body is used to absorb the dimensional changes of the pipelines, conduits and vessels caused by hot expansion and cold contraction, or to compensate the axial, transverse and angular displacements of the pipelines, conduits and vessels.It can also be used for noise reduction and vibration reduction.It is widely used in modern industry.

Usage

Can compensate lateral and angular displacements of curved pipes.

installation

1. After the compensator arrives, the following contents need to be checked out of the box:Documents: It is necessary to check whether the models, specifications and technical parameters listed on the compensator's nameplate, certificate of conformity are consistent, and other necessary auxiliary technical documents are complete.Visual inspection: There should be no obvious scratches or sharp indentations on the compensator; there should be no foreign matter inside the compensator (wave trough); the connection port should be intact.Peel off, large drawbars, transport pullbars, and fasteners should be complete.

2. Precautions for lifting and transportation of compensator:When hoisting, special hoisting fixtures or lifting ears should be used. It is strictly forbidden to use transport rods as load-bearing components.The small-caliber compensator without lifting lugs can be tied to the takeover because of its light weight.During transportation and storage, prevent sun and rain, water immersion, and harmful gas corrosion.During transportation and storage, it is necessary to prevent falling and collision, and do not stack them with other items to avoid damage to the corrugated pipe.Bundles should be secured during transportation to prevent movement and rolling.