MachineU > China Products > Tools & Hardware > Pipe Fittings
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure
Specifications
Brand Name :
HUASHIDA
Certification :
ISO9001
Place of Origin :
Qingdao，Shandong，China
MOQ :
1
Payment Terms :
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Delivery Time :
come to an agreement in respect of the delivery time
Packaging Details :
Packing according to Machine
Application :
Pipeline Joint Closure
Connection Type :
Elecro Fusion Welding
Warranty :
24 Months
Customized :
Customized
Thickness :
Customized
Description

PE Electrofusion Sleeve for Pre-Insulated Pipe Girth Weld Pipeline Joint Closure

PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure

More than 15 years of production experience
The organizer of the National Symposium on the Production and Application of Electro-fusion welding belt
Recipient of utility model patent for electric fusion sleeve
Exporting the electro-fusion welding tape to Turkey, Sudan, UAE, Japan, Russia, Kazakhstan and other countries with good feedback.
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure

INTRODUCTION
Electrofusion weldable joint is a pre-cut high-quality HDPE sheet embedded with nicochrome net. It is used as polymer pipe welding materials or fittings, which is installed by a special electric heating welder.
The tape size can be customized. It can be used for a big range of pipe diameter from 200mm.



Electrofusion mesh:

Material and composition: The electrofusion mesh is made of nickel and chromium thin-walled stainless steel plates by high-pressure punching. and the composition of the stainless steel plate meets the following requirements

PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure

Performance:
1. Adopt high-quality raw material: HDPE 2480 produced by China Petroleum &Chemical Corporation and High-temperature resistance nicochrome net.
2. The tape/sheet is fully fused with the pipe after electric heating with good sealing effect, corrosion resistance, and long life service.
3.Able to withstand axial forces initiated by axial movements of the pipe in the ground;
4.Able to withstand radial forces and bending moments;
5. Able to withstand the effects of temperature and temperature variations.

PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure

Size and deviation of the electrofusion mesh

Mesh material

Electrofusion mesh

Electrofusion sleeve
Thickness Deviation Width Deviation Length Deviation
0.30 ±0.015 50 0 〜+0.2 1770 0—+10

Resistivity of electrofusion mesh should comply with the following standard

Resistivity of electrofusion mesh

(mm/m)

Width of electrofusion mesh

(mmxmm)

Mesh hole

mm

Mesh wire

(Q/m)

Resistivity
50 3x6 0.3 0.8

PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure

PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure

Specification
Steel pipe outside diameter (mm) PE outside casing diameter (mm) Width(mm)
DN159 285 600
DN219 315 600
DN273 365 600
DN325 420 600
DN377 500 600
DN426 550 600
DN478 630 600
DN529 655 600
DN630 760 600
DN720 850 600
DN820 960 600
DN920 1054 600
DN1020 1155 600
DN1220 1380 600
Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final Test Unit Standard Test Result Result
Raw material density g/cm 3 ≥0.935 ≤0.961 PASS
Raw material melt flow rate g/10min ≤0.50 0.46 PASS
Appearance check / Inernal and external surfaces is clean and free from other defects. Pass PASS
Heat reversion % ≤3;shall not show any cracks 0.89,No cracks PASS
Tensile yield strength Mpa ≥19 20.2 PASS
Elongation at break % ≥350 656 PASS
Stress crack resistance h ≥300 Pass PASS

PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint ClosurePE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint ClosurePE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint ClosurePE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure
Send your message to this supplier
Send Now

PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure

Ask Latest Price
Watch Video
Product Detail
Brand Name :
HUASHIDA
Certification :
ISO9001
Place of Origin :
Qingdao，Shandong，China
MOQ :
1
Payment Terms :
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Delivery Time :
come to an agreement in respect of the delivery time
Contact Supplier
video
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure
PE Electrofusion Sleeve For Pre-Insulated Pipe Girth Weld Pipeline Joint Closure

Qingdao Huashida Machinery Co., Ltd.

Verified Supplier
2 Years
shandong, qingdao
Since 2003
Business Type :
Manufacturer
Main Products :
Pre-Insulated Pipe Production Line, 3LPE Coating Pipe Production Line, Polyurethane Spraying Foam Preinsulated Steel Pipe Making Machine
Total Annual :
3000000-5000000
Employee Number :
100~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Heat Shrinkable Sleeve
MachineU China Products Tools & Hardware Pipe Fittings
Contact Supplier
Submit Requirement