WCB CF8 CF8M NPT BSP Female Threaded Free Ball Floating Steam Trap
Product introduction:
A steam trap, also known as an automatic drainer or condensate drainer, is divided into steam system use and gas system use. The steam trap is installed at the end of the steam heated pipeline, and its function is to continuously discharge the condensate water from the steam heated pipeline to the outside of the pipeline.
The structure of the free floating ball drain valve is simple, with only a finely ground stainless steel hollow floating ball as a moving part inside. It is both a float and an opening and closing component, with no vulnerable parts and a long service life. The drain valve is equipped with a Y-series automatic air exhaust device inside, which is very sensitive and used for the discharge of condensed water in steam heaters.
Free ball floating steam trap valve products use the principle of buoyancy, float according to the amount of condensed water changes with the water level and rise, automatically adjust the opening of the valve seat hole, continuous discharge of condensed water.When the condensate stops entering, the float drops to the bottom by its own weight and closes the drain seat hole.Because the drainage valve seat hole is below the condensate water level, the water vapor is separated naturally and the water seal is formed to achieve no steam leakage.
Product component and performance:
Strength test | 1.5 times of pressure nominal | Valve body | WCB/HT/QT | ||
Performance test | Air | 0.4~0.6Mpa | Bonnet | WCB/HT/QT | |
Water | 0.4~0.6Mpa | Float ball | Stainless steel | ||
TMO | 350℃ | Valve seat | Stainless steel | ||
PMA | 0.5~4.0Mpa | Filter | Stainless steel | ||
TMA | 280℃~540℃ | Shield | Special steel | ||
LNT | ≈0℃ | Auto device | A105+ SS | ||
MRBP | 90 % | Sealing | PPL/H62 | ||
LLR | ≈0 | Bolt | 45/35CrMoA | ||
Medium | Steam condensate | Nut | 45 |
Used in steam heating equipment, condensate recovery system and conditions requiring rapid condensate discharge, it can automatically, rapidly and continuously discharge condensate, effectively prevent steam leakage, and obtain the best heating effect.
1. The float ball can automatically adjust the opening of the valve seat hole, with continuous work and stable performance.
2. Good air exhaust performance, automatic exhaust device, no air lock phenomenon, smooth work without noise.
3. Automatic free floating ball trap is an automatic valve, especially for low pressure, low displacement and high temperature stability requirements, not with condensed water steam equipment is more suitable.
4. Automatic free floating ball trap can continuously drain water, stable performance, large displacement, small leakage.
5. It can drain continuous saturated water, so that the condensate storage is less, the heating temperature is fast and the heating temperature is stable.