Cast Steel And Stainless Steel Flanged Free Ball Floating Steam Trap With Auto Air Vent Function
Product introduction:
Free ball floating steam trap valve products use the principle of buoyancy, float according to the amount of condensed water changes with the water level and rise, automatically adjust the opening of the valve seat hole, continuous discharge of condensed water.When the condensate stops entering, the float drops to the bottom by its own weight and closes the drain seat hole.Because the drainage valve seat hole is below the condensate water level, the water vapor is separated naturally and the water seal is formed to achieve no steam leakage.
Product component and performance:
Strength test | 1.5 times of pressure nominal | Valve body | WCB/HT/QT | ||
Performance test | Air | 0.4~0.6Mpa | Bonnet | WCB/HT/QT | |
Water | 0.4~0.6Mpa | Float ball | Stainless steel | ||
TMO | 350℃ | Valve seat | Stainless steel | ||
PMA | 0.5~4.0Mpa | Filter | Stainless steel | ||
TMA | 280℃~540℃ | Shield | Special steel | ||
LNT | ≈0℃ | Auto device | A105+ SS | ||
MRBP | 90 % | Sealing | PPL/H62 | ||
LLR | ≈0 | Bolt | 45/35CrMoA | ||
Medium | Steam condensate | Nut | 45 |
Product Discharge capacity under different pressure:
Port size | 15~25 | 32~50 | 65~80 | 100~125 | 125~150 |
Pressure Mpa |
B | D | F | G | G |
Max discharge capacity (Kg/h) | |||||
0.5 | 550 | 1000 | 1900 | 2270 | 2730 |
0.6 | 410 | 850 | 1630 | 1800 | 2300 |
1.0 | 360 | 790 | 1300 | 1660 | 2120 |
1.6 | 350 | 740 | 900 | 1290 | 1990 |
Used in steam heating equipment, condensate recovery system and conditions requiring rapid condensate discharge, it can automatically, rapidly and continuously discharge condensate, effectively prevent steam leakage, and obtain the best heating effect.
1. Simple structure and long lifespan: There is only one movable component inside - a finely ground stainless steel hollow floating ball, with no vulnerable parts and a long service life.
2. Continuous drainage, stable performance: It can automatically adjust the opening of the valve seat hole, continuously discharge condensed water without being affected by pressure, temperature, and fluctuations in condensed water flow rate. The minimum subcooling degree is 0 ℃, and there is no water accumulation in the heating equipment, resulting in high thermal efficiency.
3. Good automatic air exhaust performance: Built in automatic air exhaust device can sensitively eliminate air or non condensable gases in the pipeline, prevent air lock phenomenon, and ensure rapid heating of the equipment.
4. Superior sealing performance: The floating ball has high precision, good sealing performance, low steam leakage rate, and significant energy-saving effect.
5. Widely applicable: It can be used for steam heating equipment and steam pipelines in industrial sectors such as petroleum, chemical, light industry, metallurgy, and power, especially suitable for drum drying equipment with high requirements.
6. Easy maintenance: The internal parts are easy to disassemble, making it convenient for inspection and maintenance.
7. Good water hammer resistance: It can effectively prevent water hammer phenomenon and protect the safe operation of pipelines and equipment.
These advantages make automatic free floating ball drain valves play an important role in industrial steam systems, ensuring stable operation of steam heating equipment and pipelines, improving thermal efficiency, and saving energy.