T Inner Mounted Electric Pipe Beveling Machine,Tube Beveller With Adjustable Speed

Product Introduction

Bohyar’s electric pipe beveling machine is a lightweight, portable end prep beveler to produce precise, highly repeatable weld preps, which is widely used in boiler, pharmaceutical industry and other areas. It can process various material pipes such as stainless steel carbon steel, alloy steel under different inner mounted size from 12.5mm to 240mm.Our BPP pipe beveler is the ideal choice for various pipe end cutting and beveling.

Structure

Technical Parameters

*Electric: Rated voltage of 220V, 50/60Hz

Features

■ Made of lightweight and high-strength aeronautical aluminum material to ensure portability.

■ The machines are small and light since their main body is made of aviation aluminum and the sizes of all parts are optimized. The well designed expansion mechanism can realize quick and precise positioning, moreover, the machines are solid enough, with sufficient rigidity for the processing. A variety of available cutters enable the machines to process pipes of different materials and bevel ends with various angles and plain ends. Besides, the unique structure and its self-lubrication function endow the machines with long service life.

■ Position the machine in the center of the tube and install the appropriate tool to complete the preparation.

Installation & Processing

■ During installation, the tools should not touch the feed spindle and the expansion block.

■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.

■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.

During installation, the tools should not touch the feed spindle and the expansion block.

■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.

■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.