Dry Bearing, DU, DU-B, DX, PTFE Bush

Specifications:

Metallurgical structure:
PTFE with Lead +Porous Bronze Powder + Steel Backing
1. PTFE with lead 0.01~0.03mm
2. Porous bronze 0.2~0.3mm
3. Steel backing 0.7~2.3mm
4. Tin-plating 0.005mm / copper plating 0.008mm
Product Introduction:
SF-1X is wall wrapped bearing made of triple layer composites material which consists of a steel backing, a sintered porous bronze particles interlayer and calendared with PTFE and Pb mixture as surface layer, It is of low friction coefficient, anti-wear, anti-corrosion and can be used without oil, or only a trace of oil as needed. moreover, it is of low cost, low vibration and low noise, compact and light,sf-1Xis widely applied in various sliding articles of different kind of machines, Such as textile machines, tobacco machines, hydraulic vehicles, automobiles, agriculture and forests machines and soon.
Technical Data:
Load capacity：140N/mm2
Temperature：-195~+280°C
Speed limit：5m/s
Friction coef(u)：0.04~0.20
PV LIMIT(Dry)：3.6N/mm2 .m/s
PV LIMIT(Oil)：50N/mm2 .m/s
Application:
1.Dry or only a trace of grease or oil required maintenance free.
2. Low friction and with long life.
3. Low vibration, low noise and non-pollution in operation.
4. Electroplating is possible to prevent corrosion. It is widely used in various sliding motions of different kind of machine such as textile machine, tobacco machines, hydraulic, vehicles automobiles, and agriculture machines and so on.
5. Low stick slip properties ensuring accuracy of machine operation under low sliding speeds.
6. Load will spread over a wider area due to the bearing material's elastic nature.
7. PTFE and Lead film is transferred to the mating shaft to improve running properties.
8. It can be used in low hardness of mating shaft, so the shafts processing is easy.
9. The machine will be compact because of the thin thickness and low weight of the bush.
We are looking forward to your inquiry with pictures, drawings or samples...