Short Mixing Time Precast Concrete Mixer Vertical Shaft PMC4500

Protection Against Wear

The materials and coatings used to manufacture those components that come into contact with abrasive substances are specially selected for each individual application.

(1) wear - resistant alloy plates.

(2) surfacing materials.

(3) high chrome alloy.

(4) stainless steel materials.

(5) ceramic materials

(6) polyurethane material.

(7) high wear resistant rubber and cast stone materials.

Water spray pipe

The special designed sprayer is installed on the water pipe. The spraying water cloud can cover more area and also make the mixing more homogeneous.

Mixer advantages

The machine has the dual advantages of independent operation and the simple concrete mixing plant combined with PLD series batching machines. It can also provide matching hosts for the mixing station. It is suitable for all kinds of large, medium and small prefabricated component plants and highways and bridges. Water conservancy, docks and other industrial and civil construction projects are ideal for the host of concrete mixing plants. The product design structure is reasonable, the layout is novel, and it is easy to use and maintain. Users can use dump trucks and mixer trucks for their own use. At the same time, they can also be restructured according to the special requirements of users to meet their needs.

The use of mixer

1. Before use, an empty test machine shall be used. Before the test machine, the firmness of all the connecting parts of the machine table shall be checked first, especially if the bearing part is loose during transportation, the main switch is closed, and the power supply is conducted.

2. Empty test machine test. The mixer was put into production only when abnormal sounds, high temperature of bearing gears, and other undesirable phenomena were not found.

3. If abnormal vibrations or strange sounds are detected during use, stop the mixer and perform a thorough inspection.

4. The load should not be too large. It is generally measured by the load of the motor. The load current of the 380V motor when stirring the material should not exceed 6 amps. If it exceeds the load, the stirring capacity should be reduced immediately.

5. The management personnel must be familiar with the technical performance, internal structure, control structure, and use principle of the mixer. Do not leave the workplace during operation to prevent malfunctions and damage to mechanical parts, so as to ensure safe production.