Polyurethane Material Planetary Concrete Mixer PMC1000 High-Speed Operation

Features of Planetary mixer

Planetary mixer is a new type of high efficiency, stirring without dead corner equipment; it has a unique form of stirring. Planet drive the two stirring shaft turns around the material barrel, at the same time, the stirring shaft is high-speed operation, so that the material is strong shearing action, achieve full dispersion and mixing effect. In addition to the equipment within the knife scraping wall around the cylinder axis rotation, will be stuck on the wall material scraping and then put them into mixing shear, that make no residual material in the mixer and mixing effect is more ideal. Cylinder with special seal structure and have the pressure or vacuum stirring. Mixer has good deaeration effect, the cylinder body can be designed to be heated or cooled according to customers' needs. The cover is hydraulic lifting, convenient to operate and clean and the cylinder body can move freely.

The performance characteristics of Mixer

1. Reasonable design and performance optimization of the whole machine

2. Convenient use and maintenance;

3. Firm and reliable, life factory;

4. Good mixing quality and high efficiency

5. Convenient operation and fast discharging speed

6. Low energy consumption and low noise

Hydraulic System Maintenance Instruction

1. ISO-UNI HM46 hydraulic oil is recommended. Fill the oil to two thirds level of the indicator.

2. Before starting the hydraulic system, ensure nobody inside the machine and all he manual valves have been switched off;

3. The pressure of flood valve has been strictly adjusted to standard. Non-professional persons are forbidden to adjust the pressure;

4. Switch off the auto-control loop while using manual hydraulic system. Turn on manual stop valve and pull switching handle on the manual pump to the utmost. Then pull the handle to open the discharge door. Pull the handle in reverse to close the discharge door;

Principle of Motion: Mixing with no hidden corners in the mixing pan by installing mixing tools and scraper tools on a specially designed drive system. The mixing track as follows.