High Chrome Alloy Refractory Mixer Machine No Hidden Corners PMC1500

Operation Instruction

The instruction must be followed during operation:

1. Do not run over loaded;

2. Discharge material in the trough after an emergency stops. Start with load is forbidden;

3. After each shift, clean the trough, tools, check the tightness of nuts, and open and close the discharging door Several times to ensure it works smoothly,

Check the blades and tiles weekly and replace them if necessary;

4. The anti-wear parts made by our company must be used to avoid any damage to the machine;

5. Stay away from the discharging area to avoid any injury to workers.

Mixer advantages

The machine has the dual advantages of independent operation and the simple concrete mixing plant combined with PLD series batching machines. It can also provide matching hosts for the mixing station. It is suitable for all kinds of large, medium and small prefabricated component plants and highways and bridges. Water conservancy, docks and other industrial and civil construction projects are ideal for the host of concrete mixing plants. The product design structure is reasonable, the layout is novel, and it is easy to use and maintain. Users can use dump trucks and mixer trucks for their own use. At the same time, they can also be restructured according to the special requirements of users to meet their needs.

Protection Against Wear

The materials and coatings used to manufacture those components that come into contact with abrasive substances are specially selected for each individual application.

(1) ceramic materials

(2) surfacing materials.

(3) highchrome alloy.

(4) stainless steel materials.

(5) wear - resistant alloy plates.

(6) polyurethane material.

(7) high wear resistant rubber and cast stone materials.

Principle of Motion: Mixing with no hidden corners in the mixing pan by installing mixing tools and scraper tools on a specially designed drive system. The mixing track as follows.