CE Certificated Inert Gas Glove Box Lab Vacuum Glove box Single Station Glove Box For No Pollution Scientific Research Operating Testing Chamber Box Stainless Steel Vacuum Glove Box

VGB-6 -J is an inert gas operating box. By pumping air to compensate the inert gas, water and oxygen in the chamber can be less than 1ppm, making the experimental environment more pure; The whole set of equipment design is reasonable, the operation mode is simple and convenient.

Length x width x height = 1220 x 780 x 900mm single-section standard single-station glove box, single-side operation, standard inclined working face.

Lamp shade height 140mm

Features:

• Product Name: Monomer Integrated VGB-6-J Inert Gas Circulation Glove Box
• Product Category: Inert gas glove box
• Provides a controlled atmosphere environment for sensitive materials
• Gas purification system for removing impurities
• Integrated vacuum pump for maintaining low oxygen and moisture levels
• Antechamber for transferring materials in and out of the glove box
• Touchscreen control panel for easy operation and monitoring
• Includes disposable glove machine for easy glove replacement
• Suitable for fuel injector repair kits and air cushion packaging machine materials

Technical Parameters:

Technical parameter

1. Box

1.1. Box size: L x W x H =1220x 780 x 900mm.

1.2. Material: All stainless steel structure (SUS 304), thickness 3mm.

1.3. Glove mouth: diameter 220mm, hard aluminum alloy material, after anti-corrosion treatment.

1.4. Gloves: American PIERCAN gloves, caliber 8 inches, thickness 0.4 mm, butyl rubber material.

1.5. Window: Inclined design of the operating surface, using 10mm safety tempered glass, the front window and affixed with a special custom super sealing ring, using the front door open structure.

1.6. A certain positive and negative pressure (-12mbar to 12mbar) can be maintained during use.

1.7. The box is equipped with energy-saving lighting lamps and anti-reflective materials, which make the light soft and prevent visual fatigue.

1.8. A perforated power terminal panel (Power supply: 220V±10% 50Hz±10%) is preset in the container.

1.9. The box is equipped with 4 standard KF-40 interfaces for easy access to liquids, gases, signals, etc.

1.10. The box is provided with 2 layers of storage boards, with upper and lower height adjustment function.

1.11. Support: including casters, height 914mm. The caster has the functions of leveling, moving and fixing.

1.12. Leakage rate: ≤0.05vol%/h. According to the ISO 10648-2 standard document clearly given the indicators:

The hourly leakage rate of the sealed box type with a controlled inert atmosphere is ≤5×.

2. Transition cabin

Large transition module:

2.1. Shape: Cylindrical (304 stainless steel), connected to the glove box, with automatic pumping air control.

2.2. Size: Diameter 360mm, length 600mm large transition cabin (right operation), using gas spring type door opening mode, transition cabin with sliding tray.

2.3. Large transition cabin tray: stainless steel 230mm ×595mm, can move freely around the extension depth of 361mm.

2.4. Vacuum degree: ≤-0.1MPa(large transition chamber requires vacuum belt display), vacuum pressure gauge selected German Wika.

Small transition chamber:

2.5. Shape: Cylindrical (304 stainless steel), connected to the glove box, controlled by a manual valve.

2.6. Size: 150mm×300mm, single open handle pressing method.

2.7. Vacuum degree: ≤-0.1MPa(small transition chamber requires vacuum belt display), vacuum pressure gauge selected German Wika.

3. Control system

3.1. Mode: Including self-diagnosis, power off self-start features, with pressure control and adaptive functions. Automatic control, cycle control, password protection, vacuum chamber control using LCD display. The control unit adopts German SIEMENS PLC touch screen, the operation menu is optional: Chinese/English.

3.2. Pressure control: Control the pressure of the box and the transition chamber at a certain set value.

3.3. Foot pedal: can control the pressure of the glove box, easy operation.

4, circulation purification system

4.1. Purification capacity: water, oxygen <1ppm.

4.2. Adjustment device: The whole process of PLC touch adjustment (heating, evacuation, purification, regeneration) without human monitoring.

4.3. Working gas: N2 or Ar (gas cycle).

4.5. Circulation fan: Germany Elektror imported high-speed frequency conversion fan, flow 0-80m3/h, microprocessor control, pressure tested stainless steel device.

4.6. Single purification column: Germany BASF deaeration material, the United States UOP high efficiency water absorption material, of which deaeration material 5kg, deaeration 60l, deaeration material 5kg, water removal 2kg.

4.7. Purification valve: automatic electro-pneumatic valve. Modular design.

4.8. Filter: High efficiency filter with HEPA standard 0.3 micron aperture filter.

5. Regeneration system

It is used to reuse the purification system and activate it; Regeneration requires a mixture of N2/H2 or Ar/ H2 gases, with H2 accounting for 5-10%.

6. Display system

Control unit adopts German SIEMENS PLC touch screen, operation menu: Chinese/English.

7. Vacuum system

Automatic gas control plating plate; Vacuum pump selected British Edwards RV12 vacuum pump. The transition chamber can be vacuumed separately and can be controlled separately at any time. (Optional items)

Glove box selection configuration and main technical indicators

1. Water analyzer

1.1. Range: 0-1000ppm.

1.2. Error: ±1% ppm.

1.3. Environment: -10℃ -50 ℃.

1.4. Display: PLC control display.

1.5. especially for lithium battery manufacturing and metal-organic users, it can be cleaned and reused to avoid the problem of scrap after a pollution.

2. Oxygen analyzer

2.1. Range: 0-1000ppm.

2.2. Error: ±1% ppm.

2.3. Environment: -10℃ -50 ℃.

2.4. Display: PLC control display.

2.5The use of ZrO2 sensor avoids the problem that the fuel cell has a short life and cannot be exposed to the air.

3, solvent adsorption system

3.1. The effect of the agent on the purification column, the use of bypass system integrated into the glove box system, can effectively remove the solvent volatilized from the system, the media is mainly high quality and efficient activated carbon and activated alumina.

3.2. Volume and weight of activated carbon cylinder Kg: 14.9L/5Kg

Applications:

This inert gas glove box is perfect for any scenario where you need to work with materials that are sensitive to air and moisture. The VGB-6-J provides a highly controlled environment, with its circulation system ensuring that the air inside the box is constantly purified. This makes it ideal for use in research labs, testing facilities, and any other setting where precision and accuracy are paramount.
One of the most common applications for the VGB-6-J is in the production of lithium batteries. The glove box is perfect for use in this scenario because it provides a highly controlled environment where the lithium can be safely handled and stored. The VGB-6-J's circulation system ensures that the air inside the box is constantly purified, which helps prevent any unwanted reactions with the lithium.
The VGB-6-J is also a great choice for use in conjunction with a disposable glove machine. The glove box's integrated gloves make it easy to work with materials without risking contamination, while the disposable glove machine provides a steady supply of gloves that can be easily replaced as needed. This combination is particularly useful in settings where hygiene and cleanliness are of the utmost importance.
When it comes to product specifications, the Monomer Integrated VGB-6-J Inert Gas Circulation Glove Box is a top-of-the-line product. With a minimum order quantity of just 1, it's easy to get started with this product no matter what your needs may be. The VGB-6-J is also backed by JUSHIEN's reliable supply chain, with a supply ability of 30 sets per month and a delivery time of just 5-8 work days. Packaging options include cartons, pallets, wooden cases, or customized packaging according to customer requirements. Payment terms include a 30% deposit and 70% T/T before shipping.

Support and Services:

The Inert gas glove box is a state-of-the-art product designed to meet the needs of researchers and scientists in a variety of fields. Our product is built with high-quality materials and advanced technology to ensure that users can work with sensitive materials without fear of contamination or exposure to hazardous substances.
We offer comprehensive technical support and services to our customers to ensure that they get the most out of their Inert gas glove box. Our team of experts is available to answer any questions or concerns that you may have about the product, and we are committed to providing timely and effective solutions to any issues that may arise.
Our services include installation and setup of the Inert gas glove box, as well as ongoing maintenance and repair. We also offer training and support to ensure that users are able to operate the product safely and efficiently, and we are always available to provide assistance with troubleshooting or other technical issues.
If you have any questions or concerns about the Inert gas glove box or our technical support and services, please do not hesitate to contact us.

Packing and Shipping:

Product Packaging:

• The inert gas glove box will be packaged in a sturdy cardboard box to ensure safe transportation.
• The packaging will also contain foam padding to protect the glove box from any damage during transit.
• All necessary hardware and instructions will be included in the package.

Shipping:

• The inert gas glove box will be shipped via a reputable carrier.
• The shipping cost will be calculated based on the destination and weight of the package.
• The estimated delivery time will depend on the destination and shipping method selected.

FAQ:

Q1: What is the brand name of this product?
A1: The brand name of this product is JUSHIEN.
Q2: What is the model number of this product?
A2: The model number of this product is VGB-6.
Q3: Does this product have any certification?
A3: Yes, this product has CE Certification.
Q4: Where is the place of origin of this product?
A4: The place of origin of this product is China.
Q5: What are the payment terms for this product?
A5: The payment terms for this product are 30% deposit + 70% T/T before shipping or T/T.
Q6: What is the minimum order quantity for this product?
A6: The minimum order quantity for this product is 1.
Q7: What is the supply ability for this product?
A7: The supply ability for this product is 30 sets per month.
Q8: What is the delivery time for this product?
A8: The delivery time for this product is 5-8 work days.
Q9: What are the packaging details for this product?
A9: The packaging details for this product are carton, pallet, wooden case or according to customer's package requirements.