1. Hybrid Linear Stepper Motor Overview

Hybrid linear stepper motor is a new linear movement executive motion control product, converting the round rotation movement into linear movement.

The hybrid linear stepper motor is composed of driving motors, deceleration gears, screws, nuts, guides, push rods, slides, spring, shells and turbine, micro -control switch, etc.
Generally, the standard stroke of the electric screw is 100,150, 200, 250, 300, 350, 400mm, while special stroke requirements can be supported by flexible customization. The hybrid linear stepper motors can be designed with different thrust screw leads according to different application loads.

The maximum thrust of the hybrid linear stepper motors can reach up to 20kN, the without load speed normally is 4 ~ 45mm/special linear speed can also be customized.
The use of hybrid linear stepper motor as an execution agency can not only reduce the gas/liquid source device and auxiliary equipment required to use pneumatic and hydraulic pressure, but also reduce the weight of the execution agency.

Hybrid linear stepper motor features,

When the Hybrid Linear Stepper Motor works, each phase winding is not constant power -on, but the electricity is rotated according to a certain rule.

The angle of the transition of a pulse signal rotor is called a step distance.

The Hybrid Linear Stepper Motor can be controlled at a specific instruction, or the speed control can be performed. When the angle control is controlled, each pulse is entered, and the stator winding is replaced once, and the output shaft is turned over one angle. The number of steps is consistent with the pulse number. The angular displacement of the output shaft rotation is proportional to the input pulse. During the speed control, the continuous pulse is delivered in the stepping motor winding, each of which continuously rotates electricity, and the motor continuously moves. Its speed is proportional to the pulse frequency. Change the power sequence, that is, changing the rotation direction of the stator magnetic field, you can control the rotation of the motor or reverse.

The Hybrid Linear Stepper Motor has self -locking capacity. When the control pulse stops input and allows the last pulse control winding to continue DC power, the motor can be kept in a fixed position, that is, stop at the end point of the corner displacement of the last pulse control. Realize the rotor positioning during parking.

Hybrid linear stepper motors are widely used in automation applications, such as electronic production machines, semiconductor producing, medical equipment’s, testing platforms, factory automation, etc.

2. Hybrid Stepper Motor Naming Rules and General Technical Specifications
Linear stepper motor naming rules,


General Specifications,

3. 35LHS No Captive & External Nut Type Hybrid Linear Stepper Motor Performance Datasheet

Note: Customization of motor specifications available.
Available leadscrew specifications,

4. Mechanical Dimensions (in mm)

External Nut Type Mechanical Drawings as bellow,




No-capative Type mechanical drawings as bellow,



5. Force and Pulse Rate Curves


6. Wirings