Electrical Surgical Unit / Red / Urology Plasma Generator for BPH Surgery

Product Parameters:

Product description:

Mechan Urology Plasma Surgery System contains:

1). One tabletop generator

2). One reusable and non-sterile power wire.

3). One reusable and non-sterile footswitch.

4). One reusable and non-sterile handle which is for foot control.

5). Treatment probes.

The generator produces the plasma energy, which is to target treatment area through treatment handle and probe. Before use, the handle should be bent. And there are bipolar and multipolar probes supplied.

Indications:

Bladder Cancer, etc.

Storage:

This device should be stored in a well-ventilated room without corrosive gas. The height above ground and the distance from wall should be above 30cm. Stack limit is 6 cases. Before being stored for a long time, it should be cleaned thoroughly for proper packing and storage. And it should also be taken out for power up every year, in order to avoid it from moisture, mildew or even damage. The suitable weather and environment condition is as below:

1. Temperature: -40℃～+55℃;

2. Relative humidity: ≤90％;

3. Atmospheric pressure: 50kPa～106kPa

Product Features:

1. Bipolar or multi-polar cutting, low temperature ablation, resection, hemostasis and coagulation, minimally- invasive, safe and reliable way.

2. Two ABLATION modes (including channeling, resection, hemostasis and ablation).

3. One PLACOAG mode (including hemostasis and coagulation).

4. Different types of probes available for options. The length, diameter, radian, energy level of probes are designed as per the requirements of different locations and diseases.

5. Multi-function probe designed for ablation, coagulation, hemostasis and resection. All functions are achieved at the same handle and in same output socket, thus no need to change probes frequently during surgery.