Procise Plasma Wand Spine Probe Minimally Invasive Plasma Surgery

Product Introduction

MECHAN Orthoepedic Plasma Surgery System PLA-800 are designed to operate in urology field, it includes both ablation and coagulation modes, which result in different tissue effects. It is widely applying to spine and joints treatment.

Product Diagram

Product Character

Technical Parameter

Product Advanatages

• Safety: multi-polar design, change the traditional way that current flow through human body
• Low Temperature: 40 to 70 centigrade during operation, decrease the thermal damage to around normal tissue
• Precise cutting: the thin plasma layer make precise cutting becoming true, and it will not hurt the around normal tissue
• Speedy cutting: cutting and coagulation at the same time, no need to change the probe frequently, saving operation time
• Shorten recovery period: less hurt to human body, recovery faster

System Set Up

1). One tabletop generator device

2). One reusable and non-sterile power supply cable.

3). One reusable and non-sterile footswitch.

4). One reusable and non-sterile treatment handle which is for foot control.

5). Treatment probes.

Anesthesia

Epidural anesthesia is usually used. You can also choose spinal anesthesia or general anesthesia.

Storage Condition

This device should be stored in a well-ventilated room without corrosive gas. The height above ground and the distance from wall should be above 30cm. Stack limit is 6 cases. Before being stored for a long time, it should be cleaned thoroughly for proper packing and storage. And it should also be taken out for power up every year, in order to avoid it from moisture, mildew or even damage. The suitable weather and environment condition is as below:

1. Temperature: -40℃～+55℃;

2. Relative humidity: ≤90％;

3. Atmospheric pressure: 50kPa～106kPa