Anti-Corrosion, Erosion Control High Durability, Long Service Life Plastic Geogrid Mesh
Plastic Geogrid Mesh Introduction
Plastic Geogrid is made of virgin Polypropylene(PP) and carbon black, produced through extruding, punching, heating, longitudinal stretching, transverse stretching. It has high tensile strength, excellent interlock capacity and low creep deformation.
Plastic Geogrid Mesh Features
1. Prevent culverts from flawing.
2. Enhance earth slope and prevent water loss and soil erosion.
3. Decrease under layer thickness and save manufacturing cost.
4. Enhance the stability of side slope turf net patch to improve greening.
5. Replace wire netting used in mine as intermediate ceiling netting.
Biaxial Plastic Geogrid Specification
Project | TGSG15-15 | TGSG20-20 | TGSG25-25 | TGSG30-30 | TGSG40-40 | TGSG45-45 | TGSG50-50 |
Longitudinal tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
Transverse tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
Tensile Strength @2% Strain KN/m | 5 | 7 | 9 | 10.5 | 14 | 16 | 17.5 |
Tensile Strength @5% Strain KN/m | 7 | 14 | 17 | 21 | 28 | 32 | 35 |
Roll width | 3.95 or 5.95 meters | ||||||
Roll Length | 50 meters |
Plastic Biaxial Geogrid Applications
1,Pavement subgrade stabilization
2,Pavement base reinforcement
3,Railway and high way bed stabilization
4,Area and ground stabilization
5,Working & Load transfer platforms
6,Reinforced granular foundation beds