Ground Improvement Using Modified Polyethylene 3D-Cellular Confinement Systems
The History of 3D-Cellular Confinement Systems
The Army Corp of Engineers invented 3D geocelluar grids in the 1970’s. The geocell was designed for quick installation on beaches for amphibious beach assaults. It could be stored and moved in a very compact form, expanded and filled with sand, and ready at an instant for supporting vehicles, which would otherwise get stuck in the sand. The geocells were also used extensively in Desert Storm. Soldiers would spread the geocells out in the desert, fill cells with sand, and drive tanks and trucks on them. They would even land planes on them! The geocells could easily be removed when no longer needed.
3D-Cellular Confinement Systems Specification
1. Cell depth: 50mm,100mm,150mm,200mm,250mm,300mm
2. Welding distance: 330mm~1600mm
3. Thickness: 1.0mm,1.2mm(smooth), 1.5mm,1.8mm(textured)
4. Appearance/surface: smooth/textured
Item | Main Specification |
Weld Spacing | 330mm to 1600mm |
Cell Height | 50mm to 300mm |
Seam Peel Strength | 1000N, 1100N,1200N,1420N |
Color | Black, Green, Sand, pray |
Surface | Smooth/Textured/Perforated |
3D-Cellular Confinement Systems Feature
1,Eco-Friendly
2,Inexpensive
3,Permanent Solution
4,Low Maintenance
5,Cells can be filled with soil and planted with vegetation or filled with aggregates
6,Easier to install than a retaining wall
3D-Cellular Confinement Systems Applications
1,Embankment Restoration
2,Slopes greening
3,Green Roofs
4,Roadside Embankment Reinforcement