Plastic glass making machine GS288V

Specification

PRODUCT SHOW

1 LCD computer control with big display screen

2 Hydraulic proportional valve

3 Generous space for fitting large moulds

4 Large opening stroke

5 Two positon transducers to control clamping and injection

6 4-stage of injection speed, 3-stage of holding pressure, 4-stage of metering phase can be setup according to products' requirement.

7 Optimal platen design, with toggle junction casting together with platen improves rigidity of mechanical system hence improves product dimensions accuracy

8 Screw and barrel are made of high quality new materials, which extended the service life

9 Screw back pressure control

10 Multiple hydraulic ejection

11 Differential area high speed clamping

12 centralized lubrication system

13 All hydraulic components and seals are offered by famous international manufacturers

14 Mechanical safety interlock

15 Electrical safety interlock

16 Oil return filter

Features

The GS-V plastic injection machine with variable pump series is the fine product of energy saving of Guangsu Company, which adopt the advanced international control technology of variable pump. The product adopts high response proportional variable system, making the output power of hydraulic system of plastic injection machine matching with the actual consumption, avoiding the loss of high pressure regulated flow and overflow. Compared to the machine with common constant flow pump, 30%50% electricity can be saved, showing obvious economic benefits.

In addition, the heat produced by the machine is low, reducing around 30% cooling water consumption, reducing noise around the machine, extending the service life of hydraulic seals of oil circuit and hydraulic oil, reducing greatly the use and maintenance cots of machine, at same time, the strict global environment-friendly requirements are satisfied. The GS-V plastic injection machine with variable pump series brings obvious economic benefits to wide customers relying on its excellent performance.

The GS-V plastic injection machine with variable pump series shows its excellent performance as below:

Energy saving 30-50%;

Quick response of system, short shaping period;

The oil temperature of system reduces greatly the produced heat;

Reduce the mold opening/closing impact, extending the service life of machine and mold;

Extend the service life of oil circuit system, reducing maintenance times, and saving large amount of maintenance cost;

High accuracy demand on hydraulic oil; and high accuracy return filter is provided.

1.adopt the advanced international control technology of variable pump

2.high response

3.avoid the loss of high pressure regulated flow and overflow

4.30~50% electricity saved

We all do best try to make products perfect!