MF800 Plastic Pulverizer Machine for HDPE PE LDPE LLDPE Plastic

MF800 is Huibang's biggest model at present. It is widely used in grinding materials that is of moderate hardness. For example PE, PVC, PP, ABS, PA, EVA, PET, PS, PPS, EPS, PC, Styrofoam, Cow leather and so on. MF800 plastic pulverizer machine takes in the advanced technologies from Europe and combines with advanced design concept and market demand. Due to this reason, we solved the problem of low output and high energy consumption. Over the years, we have improved the large,medium and small plastic mill. At the same time, customers are satisfied with our high quality products and perfect service.

Characteristics:

1.With water cycle and wind cooling, the machine can be applied into processing heat sensitive material.

2.With the tail-wagging air stream (partly eddy flow) produced by the tail-wagging of the main shaft capstan of the machine, the input tail-wagging materials collide strongly with the board and the cutting blade, and was grinded into powdery (without sieving).

3.Both the board and the cutting blade are made of abrasion-resistant steel, with excellent performance after heat treatment.

4.With severeness of framework, the volume of the machine is quite small. If you open door closure, you can maintain it. It is completely airproof and without any dust leakage.

5.With winding reclaiming equipment, the machine is features by cooling materials evenly, quick cooling and some other characteristics.

Specifications are not binding and subject to change without notice.

Founded in 2006, we have many years experience in exporting the plastic pulverizer machine, we HUIBANG warmly welcome you and your colleges to visit us, check the plastic pulverizer machine at sight and discuss the business for plastic pulverizer machine.

A number of factors need to be considered for the selection of the correct sized pulverizer. To make it easier to get a quote for HUIBANG Precooling Plastic Pulverizer Machine for 80 mesh PE Plastic, please let us know the following answers.

1. Type of Plastic: MFI (Melt Flow Index)
2. Size of regrind to be fed into the pulverizer:
3. Machine currently using to make regrind?
4. What process:(eg. Extrusion, blow molding, etc.)
5. Size of powder desired:
6. Mesh/Micron size
7. Required throughputs per hour:
8. Any special characteristics to your particular material:(eg. Additives etc.)

We warmly welcome you to visit us and check the quality.

No matter at the exhibition or the workshop.